Re: 95 NEON brakes binding

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 95 NEON brakes binding

Erroneous Maximus	29 May 2006 19:03
In article <5545c6db9f178bf634f4e3d92326ebbe@localhost.talkaboutautos.com>, private@private.net says... > Hello, > [quoted text clipped - 11 lines] > > Thanks You may need to grease your brakes. The caliper must be free to move left and right. Some high temp grease on the guide pins may help. The pins should be torqued to 192 inch-pounds.

99trooper

28 May 2006 17:23

Hello,

I was having some problems with my Neon's Drivers side front brakes
binding. I ended up replacing the caliper (and bleeding) rotors and
brakes (I also ended up replacing the Passenger side caliper as I couldn't
get the piston to push back in.

Now with 2 new calipers, rotors and pads, I am still getting brake bind-
especially on the Drivers side.... What is wrong?

I checked the rubber flex line from the caliper to the metal line and
nothing appears to be pinched. What could be causing this (especially on
the DS)

Thanks

Quick links: