Re: 2002 intrepid error code p-0441

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 2002 intrepid error code p-0441

maxpower

22 Jul 2007 11:18

> ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control
> valve and the engine lightg is still on and code is still in memory. can
> anyone suggest where to go from here it would be greatly appreciated!

You could have a pinched hose from the throttle body to the purge valve.
make sure the vacuum hose is connected and has vacuum.
The NVLD (Natural vacuum leak detection) switch could be at fault . A series
of test with the proper scan tool is required to check this out

Glenn Beasley
Chrysler Tech

brokenboltz	20 Jul 2007 22:40
ahve 2002 intrepid 2.7 v6 with code showing p-0441 replaced purge control valve and the engine lightg is still on and code is still in memory. can anyone suggest where to go from here it would be greatly appreciated!

Quick links: