Re: punto hydraulic clutch slave cylinder leaking...

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: punto hydraulic clutch slave cylinder leaking...

Nick /////

14 Sep 2006 22:06

I had to play in this area on our Punto HGT. Fairly straight forward.
Replace the whole cylinder and don't mess with replacing seals. New unit is
about £52 and from Fiat as far as I can see seals are not available on their
own.

Nick /////

> anyone know if its particularly hard to fit new gaskets or whatever to
> stop the clutch slave cylinder (the one mounted on top of the gearbox)
[quoted text clipped - 6 lines]
>
> TG

The TailGunner	14 Sep 2006 09:44
anyone know if its particularly hard to fit new gaskets or whatever to stop the clutch slave cylinder (the one mounted on top of the gearbox) from leaking? it doesnt LOOK too complicated, but if its a lot of effort, i might just get my local dealer to sort it... ta much! TG

Quick links: