Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Re: E150 1992 302 EFI miss...

Tip: Looking for answers? Try searching our database.



You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

Login | Free CarKB.com registration | Whole discussion thread

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: E150 1992 302 EFI miss...

teknisk@handicapsiden.no29 Jul 2006 08:01
Hi again.....
Can it really be the engine mounts that are bad ?
When driving up hill pushing the pedal to the bottom it sometimes like jump
over an ignition  seems to me and luggs.
The same on flat road low idle it luggs and seem to me like it misses some
fires of spark.
And also when stopped with engine running it sometimes jumps over a fire for
an spark plug it seems for me.
Can this really be the engine mounts?
Regards for any help.
Tor ....
> This is easy to determine. Open the hood, start the vehicle, put it into
> drive, keep your foot on the brake and slightly press the accelerator. If
[quoted text clipped - 23 lines]
>>> Regards...
>>> Tor...

David F. Mishiwiec Sr.29 Jul 2006 00:57
This is easy to determine. Open the hood, start the vehicle, put it into
 drive, keep your foot on the brake and slightly press the accelerator.
If the mount is broken the torque side of the motor will rise at least
2-3 inches.

> This may sound funny, but you may want to change your motor mounts.
>
[quoted text clipped - 17 lines]
>> Regards...
>> Tor...

Signature

**********************************************************************************************************************************
"It took the Democrats 40 years in power to develop their sense of
entitlement. The Republicans have a much shorter learning curve." -
congressional scholar Norman Ornstein, resident scholar at the American
Enterprise Institute.

"The Broken Branch" by congressional scholars Norman Ornstein and Thomas
Mann.
**********************************************************************************************************************************


djdave28 Jul 2006 22:55
This may sound funny, but you may want to change your motor mounts.

>Hi....
>I have some ignition problem on my van. It feels like it have a missed
[quoted text clipped - 15 lines]
>Regards...
>Tor...

teknisk@handicapsiden.no28 Jul 2006 19:37
Hi....
I have some ignition problem on my van. It feels like it have a missed
ignition some times, og a little bad ignition on some sylinders.
Have new spark plug with correct gap.(checked many times) and new wires
(Changed twice) and new cap and rotor (changed twice) New cleaned and tested
EGR valve. IAC tested and seems to funktion OK. No vakum leaks. (tested
alot) new gasket between upper and lower intake manifold. New gasket for IAC
and trottle body. New Coil.
New O2 sensor. New tempratur sensor and new map sensor.
Adjusted timing correct many times, but don't seem to help, it still misses.
Can miss alot when cold, so run find for a while, and start missed alot when
hot again.
Coul it be the ICM ignition control module? Or could it be the ECU
Electronic control unit?
I have looked over and cleaned alot of connectors, but it don't seem to
help.
Anyone have any ide?
Regards...
Tor...

Quick links:

 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage




©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.