You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: 94 Ranger dies while driving
| I. Care | 10 Jan 2008 07:41 |
In article <d60991ea-14ac-47c4-b6b0-371beaf31ea4 @s19g2000prg.googlegroups.com>, walshmf@gmail.com says...
> We have a 94 Ranger V6 2x4. The engine was high mileage and had a > head gasket leak and was consuming oil. We replaced the engine with a [quoted text clipped - 8 lines] > > Help. So when it dies and you restart it does it start right up? Remember Fuel, Air and spark. Are the plugs firing when you try to restart? Does the fuel pump run? Are there any diagnostic codes set?
 Signature I. Care Address fake until the SPAM goes away ;-}
|
| TroubledTruckDad | 10 Jan 2008 04:23 |
We have a 94 Ranger V6 2x4. The engine was high mileage and had a head gasket leak and was consuming oil. We replaced the engine with a Jasper remanufactured engine. Everything seems fine with one exception: it dies while driving with no warning.
We're looking for suggestions. The ignition switch was bad so I replaced it. No difference. We've considered replacing the computer but the frustration is growing to the point we're considering selling the truck which we really don't want to do. It's in good mechanical shape otherwise.
Help.
|
Quick links: