Re: Ranger Turn Signal Problem

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Ranger Turn Signal Problem

NHYankBoy

22 Jan 2008 14:35

I have a 97 Ranger extended cab XLT. My turn signal switch was
intermittant in the right turn position and has now stopped working
all together. It still works for the left turn position. Could this
be a burned out turn signal bulb, or is it probably the switch? Is
there some way to clean the switch contacts, or does the switch
normally need replacing? If it needs replacing, how difficult is it
to replace? Recall that the turn signal stalk also houses the wiper/
washer switch mechanism.

I should also mention that it has been really cold where I live. Not
sure if that might effect the turn signal mechanism.

Thanks for your help.

Quick links: