Re: 1994 Ford Taurus Replacing Air Compressor Pulley

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 1994 Ford Taurus Replacing Air Compressor Pulley

C. E. White

26 Sep 2006 13:41

>I have a 1994 Ford Taurus 3.8L V-6 GL Sedan. The bearing or clutch in the
>a/c compressor pulley is going bad.
[quoted text clipped - 6 lines]
> (labor) to have the a/c compressor pulled and the a/c bypass pulley
> installed?

You do not have to remove the A/C Compressor to replace the clutch. I would
estimate an experienced mechanic could do it in less tha 1.2 hours, so
figure another $100 to have it replaced.

Ed

cajuhi

25 Sep 2006 19:16

I have a 1994 Ford Taurus 3.8L V-6 GL Sedan. The bearing or clutch in the
a/c compressor pulley is going bad.

Since the car is old, I don't want to spend anymore fixing it than I have
too. I have been quoted $900 to replace the a/c compressor with another one.

I have priced an a/c bypass pulley for $35.00. How much should it cost
(labor) to have the a/c compressor pulled and the a/c bypass pulley
installed?

Quick links: