Re: oil pan hole(welded??)

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: oil pan hole(welded??)

RustY©	28 Sep 2006 08:21
> question?? on my 92 cougar .......a small rip or hole in the > metel on the pan.........do's or don't s to watch out for........> You will get away with brazing it, whether you patch it or just seal it (depends how bad you've ripped it). It will have to come off though, so it may be cheaper and easier to replace it.

robert -wanda fox	28 Sep 2006 03:01
question?? on my 92 cougar 3.8,the can bottomed out in a sink hole and right by the oil plug on the pan, it hit and caused a small rip or hole in the metel on the pan,the plug itself seems fine the damage is about 2 inches to the side of it in a flat part of the pan,is it okay to weld it shut,what type of weld is correct?? any do's or don't s to watch out for???? thanks

Quick links: