You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: 99 taurus 3.0, power steering issues
| bbeyer | 29 Sep 2006 14:39 |
>> the p/s fluid level on this 99 taurus i'm working on is fine when the engine >> is running, and the steering works great. but when you shut off the engine, [quoted text clipped - 8 lines] > >Rob but should i change the line too?
|
| trainfan1 | 29 Sep 2006 05:06 |
> the p/s fluid level on this 99 taurus i'm working on is fine when the engine > is running, and the steering works great. but when you shut off the engine, [quoted text clipped - 14 lines] > > has anybody here heard of this? Absolutely.
Time to change out the rack - the seals have failed... you have ALL of the symptoms.
Rob
|
| bbeyer | 29 Sep 2006 00:54 |
the p/s fluid level on this 99 taurus i'm working on is fine when the engine is running, and the steering works great. but when you shut off the engine, the fluid slowly comes up and spill out of the pump reservoir. i have never seen such a thing! i looked online to see if anybody had had this happen, and alot of people were saying that it can be cause by an air pocket, but i made sure that it was bled out, there is no way thats causing this. I read that there is a problem with the pressure lines. is this true? another mechanic i know said he changed one on a taurus once because there is a check valve built in to it and it goes bad, causing this same problem. before i became aware of this i changed the pump and there was no change. but now i noticed fluid leaking out of the tie rod boots. there must be some serious pressure build up in the system to blow the rack seals out. now i guess i'll have to change the rack and the pressure line? the parts guy at ford said they dont do too many pressure hoses. hes never heard of this problem.
has anybody here heard of this?
|
Quick links: