Re: 99 Taurus Stalls when putting in gear

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 99 Taurus Stalls when putting in gear

Backyard Mechanic

28 Oct 2006 19:35

>> 99 Taurus, 3.0L, ~78K miles.
>>
>> It starts and runs just fine. Put it in gear, and it stalls. Dead.
>> That's it. Put it back in park, starts up just fine.

> Does it stall if you give it a little throttle? I'm guessing that you
> have a faulty IAC valve. It's what adjusts the idle, and it's a
> common failure.
>
> CJB

Another indicator: engine RPM responds slowly to A/C clutch cycling,
drops in RPM, takes a second to recover. Same with Power Steering at lock.

My THEORY is this indicates a sluggish motor as opposed to a sticky valve
bobbin. In THAT case there's often hard starting.

Signature

Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
you pay..DEAL with it!

CJB	28 Oct 2006 18:46
> 99 Taurus, 3.0L, ~78K miles. > [quoted text clipped - 9 lines] > > G Does it stall if you give it a little throttle? I'm guessing that you have a faulty IAC valve. It's what adjusts the idle, and it's a common failure. CJB

GMach3	28 Oct 2006 18:40
99 Taurus, 3.0L, ~78K miles. It starts and runs just fine. Put it in gear, and it stalls. Dead. That's it. Put it back in park, starts up just fine. I just replaced the speed sensor about 6 weeks ago, no other recent repairs. I'm good on maintenance on this vehicle. Any ideas? Thanks G

Quick links: