Re: CRX blower motor/resistor

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: CRX blower motor/resistor

Tegger

29 May 2007 11:56

Meathead <KevinLee33@comcast.net> wrote in news:1180439174.917970.152500
@q66g2000hsg.googlegroups.com:

> 88 CRX DX. Heater fan blows fine on every speed but #1. 2 thru 4 are
> fine. To those who know: Could this be the resistor? (I thought
> resistors were an all-or-nothing affair leaving only the highest speed
> upon failure.) Or is it the switch? Thanks.
>
> Kevin

Which speeds remain depends on which resistor wires break. There is one
coil for each speed (the smaller the coil, the slower the motor runs).

The coil is behind the glove box. Have a peek. If a coil is broken, it will
be abundantly obvious.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Meathead	29 May 2007 11:46
88 CRX DX. Heater fan blows fine on every speed but #1. 2 thru 4 are fine. To those who know: Could this be the resistor? (I thought resistors were an all-or-nothing affair leaving only the highest speed upon failure.) Or is it the switch? Thanks. Kevin

Quick links: