You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: Accord coupe - washer fluid container
| Pszemol | 21 Jan 2008 13:35 |
>> In my user manual there is a note about warning light for >> Canadian models, even for 2004. I think I will look around [quoted text clipped - 4 lines] > WHY did Honda use a smaller reservoir in USA models...there MUST be a > reason. The only reason MIGHT be that the smaller reservoir with no sensor is half or 1/3 the price than a bigger one with the sensor... Then somoebody very "smart" assumed that since in US there a many states that do not see snow around the year the US version does not need a big reservoir nor the sensor. Good luck Far North USA...
I wonder if for US version there is a "cold weather" option to buy. I bet if it was possible even rear defroster would be removed to save on manufacturing cost. Who cares about you dealing with winter...
|
| Polfus | 19 Jan 2008 20:14 |
> In my user manual there is a note about warning light for > Canadian models, even for 2004. I think I will look around > for a Canadian version of the washer reservoid then :-)) But will it fit?
WHY did Honda use a smaller reservoir in USA models...there MUST be a reason.
Peace, Polfus
|
| Pszemol | 18 Jan 2008 04:09 |
>> I can see you are an old fashioned guy who likes to spend time >> with his car and keep the garage full of funny bottles... :-) [quoted text clipped - 9 lines] > because I'm in Canada (the frozen white north and all), or maybe the design > of the '04 required a smaller reservoir. In my user manual there is a note about warning light for Canadian models, even for 2004. I think I will look around for a Canadian version of the washer reservoid then :-))
|
| JM | 18 Jan 2008 00:11 |
> I can see you are an old fashioned guy who likes to spend time > with his car and keep the garage full of funny bottles... :-) [quoted text clipped - 4 lines] > water is weaker, but then I have 2-3 more attempts and it is dry. > Even then it does not hold the full bottle, which is sad... :-) My '01 coupe has a warning light, and when it comes on I can put an entire jug of washer fluid in and still have room left for more... Maybe it's because I'm in Canada (the frozen white north and all), or maybe the design of the '04 required a smaller reservoir.
|
| Pszemol | 17 Jan 2008 22:02 |
> If your preferred method is to suck the reservoir absolutely dry before > refilling it, thus risking being without washer fluid at some point when you [quoted text clipped - 4 lines] > back in the garage for next time, then it really doesn't much matter how big > either the reservoir or the bottle is, does it? I can see you are an old fashioned guy who likes to spend time with his car and keep the garage full of funny bottles... :-)
Good design in my opinion would be low fluid warning light on the dashboard and reservoir big enough to hold FULL bottle when the warning ligth comes on to minimalise required mainenance.
The only warning I get from my accord is that the stream of water is weaker, but then I have 2-3 more attempts and it is dry. Even then it does not hold the full bottle, which is sad... :-)
Don't get me wrong, but I am comparing this accord to my old 1995 camry, which it happens had the reservoid big enought to hold the full gallon of fluid in one big gulp.
|
| Paul | 17 Jan 2008 21:11 |
> For the second time I needed to refil washer fluid in > my 2004 accord coupe. I got the 1 gallon jug from the [quoted text clipped - 11 lines] > > Would you consider it as a bad design? If your preferred method is to suck the reservoir absolutely dry before refilling it, thus risking being without washer fluid at some point when you really need it, then yes, I suppose you might consider it a bad design.
If, on the other hand, you do what a lot of people do and add fluid to the reservoir periodically before it's completely dry, and then put the bottle back in the garage for next time, then it really doesn't much matter how big either the reservoir or the bottle is, does it?
|
| Pszemol | 17 Jan 2008 16:49 |
For the second time I needed to refil washer fluid in my 2004 accord coupe. I got the 1 gallon jug from the store when the washer nozzles stopped delivering fluid. Poured the bottle but before the bottle was empty the container in the car was full and overflowing. 2-3 inches of the fluid left unused in the bottle.
Is this what you get? Or my pump is not sucking all the fluid from the container?
Why would you design a car with a washer fluid container just smaller than the widely available container the fluid is sold in the stores?
Would you consider it as a bad design?
|
Quick links: