Re: 1999 Honda CR-V, Clock and Immediate housing.

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 1999 Honda CR-V, Clock and Immediate housing.

Tony Hwang

24 Feb 2008 00:51

> Perhaps because I did it with the weather far too cold, but the removal of
> the broken clock in my 1999 Honda CR-V resulted in broken mount points
[quoted text clipped - 10 lines]
>
> Thomas

Hi,
If plastic tab is broken I guess you'll have to get whole new facia.
If that little metal clip is broke or missing you may be able to jury
rig one. I had to do it once to repair the clock redoing the soldering
on circuit traces. Luckily I did not break any thing. If you go to
dealer parts dept. they'll have IPB from which you can point exactly
what you need.
Good luck.

Thomas G. Marshall	23 Feb 2008 21:16
Perhaps because I did it with the weather far too cold, but the removal of the broken clock in my 1999 Honda CR-V resulted in broken mount points within the housing. The housing I'm talking about is the part holding the vents, etc. For the LIFE of me I cannot figure out what these parts are when I'm looking online. Can anyone point me in the right direction? Thanks! Thomas

Quick links: