You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
1991 Accord--tach goes to "0" when I turn lights or heat on
| jim_l | 26 Feb 2008 04:25 |
I have a 1991 Accord with a 5spd F20A SOHC motor that is having problems today. I woke up to take kids to school and car was dead. Car was not started for 5 days and my wife said that yesterday she heard the cooling fan running in the garage. Garage is heated to 55 degrees. So, I jumped the car and idle was fluctuating and car was running very "choppy". When I hit the gas, the engine sputtered and back fired through the throttle body. I left the car running for the 10-15 minutes that it took me to drop off kids in truck. When I came back, car was idling fine(@850rpms) and running smooth. I thought it was okay now. I turned it off after another 10 mins and went back inside. Now, I started it and went to work and everything seemed okay. When I went to go to lunch, battery was almost dead (laboring to turn over) so I let it run for a few minutes, then as I was about to pull off, I turned on the lights and the tach dropped to "0" like the car stalled but it was still running. When I hit the gas it was sputtering and back firing. I turned the lights off and the tach went back to normal. I turned the heat on and the tach went back to "0". Hopefully I will be able to limp the car the 6 miles to get home without getting pulled over for no head lights.
Any input is greatly appreciated.
|
Quick links: