Re: Main relay solder connections

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: Main relay solder connections - quick fix?

'Curly Q. Links'

30 Aug 2005 21:44

> In an earlier thread (1994 Honda Civic won't start) people recommended
> that I check the main relay to rule out a failed solder connection (for
[quoted text clipped - 7 lines]
>
> Thanks.

=============================

You dont' even have to touch it to prove if it's causing the problem. In
a quiet place, turn the key to position II. Listen to fuel pump run for
2 seconds. If it doesn't run, smack the dash and listen. If pump runs,
it's your Main Relay. You car will now start, and the vibration will
keep the relay working until you shut the engine off.

Have you checked that that your timing belt isn't broken yet?

'Curly'

hutchtoo	30 Aug 2005 17:52
In an earlier thread (1994 Honda Civic won't start) people recommended that I check the main relay to rule out a failed solder connection (for example http://www.tegger.com/hondafaq/mainrelay.html). Would it suffice to simply touch up the existing connections with the tip of a soldering iron? Looking for an easier workaround than re/desoldering just to rule out this simple part... Thanks.

Quick links: