You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: Good Idea Bad Idea? drive a civic with no compression on a cylinder
| Jim Yanik | 30 Nov 2005 15:29 |
>> and by risks, i mean could we do further damage to the >> cylinder/piston/valvetrain by driving with no compression and a [quoted text clipped - 14 lines] > > 'Curly' Let it spark in the cylinder,it won't harm anything. No fuel-air mix to burn with an injector disabled,but that does not matter. Those engines(non-Honda) that share a coil between two cylinders do the same thing;allowing a spark in a cylinder with no fuel-air mix.
 Signature Jim Yanik jyanik at kua.net
|
| 'Curly Q. Links' | 30 Nov 2005 01:14 |
> and by risks, i mean could we do further damage to the > cylinder/piston/valvetrain by driving with no compression and a damaged valve. > > t --------------------------
The other guys are more correct . . Unplug the injector. No worries about any backfiring, but you might still generate a 'misfire' code, but so what? At least it can't backfire if there's no fuel/air mixture present.
I was referring to chassis ground, like any part that's steel. Doesn't matter anyway, but it's worth remembering. Honda spark has to go _somewhere_ or it will go to the wrong places.
'Curly'
|
| T L | 29 Nov 2005 19:18 |
and by risks, i mean could we do further damage to the cylinder/piston/valvetrain by driving with no compression and a damaged valve.
t
>As mentioned in previous posts, my sister's 99 civic has a damaged valve on >cylinder 3 due to a timing belt breaking. The car is running, albeit poorly [quoted text clipped - 10 lines] >Thanks >Terry in Winnipeg |
| T L | 29 Nov 2005 19:17 |
As mentioned in previous posts, my sister's 99 civic has a damaged valve on cylinder 3 due to a timing belt breaking. The car is running, albeit poorly due to no compression on cylinder 3. Once you rev it up, it sounds OK.
Would it be safe to drive the car across town to a different mechanic in this condition? What are the risks? Or should it be towed?
The drive would be in the city, 50 km/h or less, and revved as low as possible. Its about a 14km trip.
Please advise.
Thanks Terry in Winnipeg
|
Quick links: