Re: Timing Belt Shredded

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: Timing Belt Shredded

loewent

21 Sep 2007 19:07

Sounds like either a bad tensioner or an overtightened or defective belt.

Either way, you are now looking at least at about $1000 repair bill to repair
the valve train. Depending on the damage to the timing cover, you may need a
new one (possibly could get from a wrecker, but unlikely). Also, the Crank
angle sensor could have been damaged, its a $130 dealer part.

When this happend on my sister's 99 civic, it ended up costing over $1200.
Also, not all of the valves may be bent. You'll need a new head gasket and
head bolts as well. Go for a honda head gasket for sure.

t

> "02 Civic, 7000 miles on new Honda belt and water pump. Belt began
>making noise, and while driving to have looked at belt broke and engine
[quoted text clipped - 4 lines]
>
> Bob

N.E.Ohio Bob	21 Sep 2007 15:04
"02 Civic, 7000 miles on new Honda belt and water pump. Belt began making noise, and while driving to have looked at belt broke and engine quit. Belt scraps were in long pieces of rubber coated string. Can see some wear on lower cover. Bent all the valves. Anyone out there seen a belt give up like this? Bob

Quick links: