Re: Mitsubishi - Rear Exhaust Mufflers E16-35

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: Mitsubishi - Rear Exhaust Mufflers E16-35

lachie63@gmail.com

28 Sep 2006 23:03

Thanks for that.

I might have to start ducking my head under a few Lancers in the
carpark to see what I can work out.

Would you agree they would likely be stainless? My only apprehension
was that a magnet stuck to them.

Measurements are 1 3/4" ID pipe, 2" ID Exhaust Tip. 17" length muffler
body.

Thanks for input.

> > Good Idea,
> >
[quoted text clipped - 5 lines]
> Australian market) that has the muffler on the LHS. I'm guessing these are
> old stock, so look at late 80's early 90's.

Stewart DIBBS	27 Sep 2006 11:36
> Good Idea, > > I put them up on a quick site: > > http://home.exetel.com.au/lachie63 OK, its from a small engine car (see the pipe diameter) eg Lancer, presumed Australian market) that has the muffler on the LHS. I'm guessing these are old stock, so look at late 80's early 90's. Signature Stewart DIBBS www.pixcl.com/lancerproject.htm

lachie63@gmail.com	27 Sep 2006 06:55
Good Idea, I put them up on a quick site: http://home.exetel.com.au/lachie63 thanks for any input. Lachlan > > I've got some Mitsubishi Exhaust's... look stainless steel. With part > > number printed [quoted text clipped - 4 lines] > Stewart DIBBS > www.pixcl.com/lancerproject.htm

Stewart DIBBS	25 Sep 2006 11:24
> I've got some Mitsubishi Exhaust's... look stainless steel. With part > number printed > after misubishi logo of : E16-35. Perhaps if you posted a picture ...? Stewart DIBBS www.pixcl.com/lancerproject.htm

lachie63@gmail.com	25 Sep 2006 02:30
Hi there, I've got some Mitsubishi Exhaust's i'd like to know what model they suit. I tried calling Mitsubishi Australia and they were no good and couldn't come up with a description from the part number, so I thought I'd try on here. They seem pretty new, look stainless steel. With part number printed after misubishi logo of : E16-35. Cheers, Lachlan

Quick links: