Re: 1995 Pontiac Grand AM

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 1995 Pontiac Grand AM

Commuter

02 Sep 2008 12:45

Pry off the plastic cap. Pull the arm up slightly until the holes are
aligned. Place a small nail through the holes. Loosen the 10 mm nut until it
is slightly above flush to the stud. Place fingers around the stud and pull
hard. Tap on the nut with a small hammer while pulling if necessary .

When replacing the arm, be sure to hold the arm up with a nail in the holes.
Use blue loctite on the threads.

> The drivers side wiper arm is bent. Anyone know how to remove it so
> it can be replaced?

emailtom@fastmail.fm	28 Aug 2008 19:34
The drivers side wiper arm is bent. Anyone know how to remove it so it can be replaced?

Quick links: