You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: 1998 Impreza Brighton 2.2 Performance
Dano58
15 Sep 2008 18:11
> My ’98 is quite a dog, doesn’t seem to pull very strongly, although it > runs well and smoothly. Looking for chips/mods to liven it up some. > I also have a cel--knock sensor. Is this normally sensor failure or > wiring corrosion? My exhaust pipe is black inside indicating rich f/a > ratio, how can I check for closed loop fuel system operation? Thanks > for any and all help. Russ
The most popular mod for these cars is to replace the 2.2 with the 2.5.... ;-) As far as the knock sensor is concerned, it's very simple to replace. Costs about $100 at the dealer.
Dan D '99 Impreza 2.5 RS (son's) Central NJ USA
rusty43
15 Sep 2008 16:22
My ’98 is quite a dog, doesn’t seem to pull very strongly, although it runs well and smoothly. Looking for chips/mods to liven it up some. I also have a cel--knock sensor. Is this normally sensor failure or wiring corrosion? My exhaust pipe is black inside indicating rich f/a ratio, how can I check for closed loop fuel system operation? Thanks for any and all help. Russ
Signature
Posted at author's request, using moderated http://www.AutoBoardz.com interface Thread archive: http://www.AutoBoardz.com/1998-Impreza-Brighton-Performance-ftopict248936.html