I'm looking for a gadget that I'm not sure even exists.  I want to build an
ignition immobilizer for my 1988 Nissan pickup by using a relay and unused
switch on my dash to turn the ignition on and off.
I figure the easiest way to open and close the ignition circuit is to plug

That is the question?
Rain, wet asphalt, I don't care about tires utilisation.
Is is more save to user 4WD in that case?
When 4WD angaded iI fill much better conrol but on the other hand one

I got a question for anyone with some XJ insight.
I just got a nice '96 green 2-dr, 5 speed w/  145,000 mi. on it, and I
want to do some repairs and add some mods to it before I put it on the
road as a daily driver, as a replacement for my civic.

How do you clean the little monsters?

I want to know where in England i can buy a Cadillac Escalade.  I am
looking for the 2003 model, black, and all chromed out. Thanks

My 1989 Chevy S10 Blazer has developed a very strange electrical problem.
When I open the door, the radio shuts off..when I open the door again, the
radio turns back on with all the settings (clock, channels) reset. Also, the
rear hatch release button and the 2 dome lights do not ...

http://www.collectorscarauction.com/cgi-local/usauction.cgi?usfourx4&1068686287
Last few hours!

I own a Toyota 1982 fj45, the body is rusted I was thinking about
replacing the existing body with a kitbody. Does any one know which
kit body is most appropriate.
Ashir

Hi eveyone,
I have a 1997 Blazer 4x4 truck.  I was told by the mechanic that I
needed new ball joints. The quote was close to $400.00 in parts alone.
the quote was for two upepr ball joints, and two lower joints.  Labour

Hello all. I have been watching this group for a while. There is some good
info here. Mind if I join in ?

I have some general questions that don't seem to be answered in my manual...
Some of these questions might seems dumb so go easy on me...
First what is the speed range that is safe to engage 4x4 in my 96
pathfinder?

i have a 78 chevy 3/4 ton with a 10'' lift 39.5 boggers and a healthy
454. i was wondering who makes a crossover steering kit for Dana 60. my
other question is why do i keep going through u-joints the pitch doesnt
seem bad, i grease it regularly but it doesnt matter. ive been told i

Most articles and posts I've been reading advise to never engage 4WD
on a part time 4WD truck while on dry pavement.  My understanding is
that this should not apply to a part-time 4WD that has a driver
operated locking center differential (4-runner for example).  Is this

I have a '96 Chevy S-10 Blazer.  The latch on the rear window was
loose and I removed the interior panel to tighten it.  One of the
parts fell inside the "tailgate" and I removed the metal panel inside
the tailgate to retrieve it.

has anyone ever owned or built a ford quadravan? if so do you have any
advice or tips on the subject, or comments on how they go? i am in the
process of building one