I notice the power and ground quick connect kits sold by Warn and others for
the 8 to 10 thousand pound winches are rated at 175 AMP and sized for #2
gauge power cable.  I figure the connects are rated for continuous duty @175
but are these components,both the connectors and cable, ...

I have a friend who has recently fitted a PTO to his land rover at the
back.  His intention was to drive a wood chipper unit that he has.  He
lives in Holland.
He says that he has now found that the PTO rotates in the opposite

Are you the owner of a Jeep Grand Cherokee that did not live up to
expectations?
More directly, did your Jeep Grand Cherokee suffer a premature rear axle
bearing failure?  Did you find your contacts with Chrysler Corporation to be

I am interested in buying a used small import p/u.
Are the Mazda B series a decent truck...body, mechanical, reliabilty.
In relation to the others...Toyota or Nissan, between the years of
1984-1990...what would be the best truck (in your opinion)...

I just bought a 2004 Sequoia, and I was going to move my winch from my
old truck to the Sequoia, but I can't seem to find anyone that sells
winch mounts for the Sequoia.
Anyone know of one, or has anyone tried a mount for a tundra on their

this is proabley old stuff now but I've got a 1995 landcruiser fulltime 4
wheel drive.Can I fit freewheel hubs and if so any change in mpg an
handeling.
           cheers Dave H

While doing the spring replacement (which is about finished!!) I
noticed the inner pads on the front brakes were about worn out on both
the driver and passenger side.
I don't remember exactly when I replaced them -- but seems like 20,000

Happy 4th everyone.
I'm in the market for a used CR-V. To date, I've test-driven two, both
5 speed manual transmission. One was a 2000, the other a 2001.
The first, the 2000, that I drove made a loud whirring/humming sound

I'm planning to buy a used SUV in the very near future. I'd narrowed
it down to an early 90's 4runner. When looking around, though, I
noticed one or 2 1990 Landcruisers in the same price range. Looking
for some experienced opinions on which would better suit my needs.

Sorry -- I messed up the last post.
Here is how it should have come:
--------------------------------------------------------------------
CJ brakes are repaired and springs are on!!

My 98 Z-71 has this annoying sound like washers on a bolt everytime I go
over the railroad tracks or any bump of substance.  Last weekend while
changing the oil, I started looking at my suspension at the rear passenger
side since that seems to be where the sound is coming from.  I ...

Got the replacement rear springs on.  Not without incident and I'll report
later when project is completed.
Now the front -- old spring is off and new spring is in place.
But I cannot remove the top connecting link pin holding the connecting link

I'm looking for a 4x4 car that will excel in snowy conditions.
I've had a '91 Jeep Cherokee, a '97 Jeep Wrangler Sport and a '01 Land
Rover Discovery II.
All of them were equipped with stock 4x4 systems, and none of them

How many people would be interested in a small 4x4 diesel swap
kit,particularly a 5 cylinder Benz or a Isuzu or Mits, in a TJ or YJ
Jeep?
Or a Bronco?

Hi Group,
   I have a 1991 GMC K-2500 with the 350 CID engine {5.7 Liter}, 217,000
miles, runs great, doesn't use oil.
    It developed a water leak and the garage replaced the intake gasket.