I am having a problem and I was hoping that someone could help.  I
have a 1968 bronco,  I am absolutly sure that the front end has been
changed, but I have recently had a kingpin come out and I am not sure
how to tell the difference between a dana 33,dana 44, and worst of all

does anybody like 1977 F250 lifted with big tires,4speed with the granny
gear

Recently bought 88 f-250 4x4 diesel. needs a new starter.
could someone explain to me what the following descriptors of a
starter are talking about:
12v, 13 tooth, 3.6kW, clockwise rotation, offset gear reduction.

Buying a new pickup truck shortly and I'm strongly leaning on a spray on
bedliner.  I've shopped around a little, just curious as if anyone has used
a product call "Pro-Tex" by SEM.    Any thoughts on it versus Rhino Linings?
Anything else I should bear in mind when considering a ...

Will changing tire diameter to a larger diameter on my pickup truck help
improve gas mileage?

I would like to install an Engine Oil Temperature Gauge in my truck
2003-silverado 2500HD 6.0 liter motor.  My question is: the gauge comes
with an electric sender, I would like to install it on the cool
(Discharge) side of the oil cooler.  Will a ?tee? fitting with the sender

I have been searching for ages trying to find ways of adding crawling
ratios and a very high overdrive to a 4 x 4 project.
My latest idea is to use two toyota transfer cases, I know it's already
been done to increase the crawling ratio - but I have now found out

Warmest Greetings!
We would like to invite everyone to visit our newly opened hotel
(Hotel Seraph) in Boracay Island, Philippines. Please visit our
website WWW.boracayseraph.com or for more info. Just Email us:

I have  this car and I rebuilt the engine and everything is back in place.
I turned the starter on and all I hear is a clicking sound. also. what do
I do even if the stater was hooked on right? How do you feed the fuel
manually through the system? And if possible does anybody have ...

about 6 mths ago we had a dead short on batt cables.  Since then we have
replace: starter, alt, new batts, batt cables and have done cks on fuses.
The pkup has power to the system but will not turn over.  We hear clicking
like the cellinoid in starter working.  We have hit a wall.  ...

Anyone care to give me their thoughts on Old Man Emu suspension systems. My
hopes are for a better ride on rocky and rutted roads with no intentional,
or extreme, rock climbing. Thanks
Bob Walker

HELP!!!  I am trying to rebuild my spicer 44-8FD front axle on my 87
Dodge W150.  I am comfortable around tools and don't mind getting
dirty... however I cannot seem to get the ring and pinion free from the
housing. I have removed the bearing caps, pried, pulled, smashed, etc

I am trying to find an engine and tranny for my 86 nissan so I can
experiment with bio diesel. anyone out there know where I can look.

I'm looking for front tow hooks for an '02 dodge ram 1500.   Mopar has a bar
with 2 hooks for the front of  '03's on up, but they say it doesn't fit an
'02!
Thanks,

Engine is 4.3L V6 Vortec fuel injected. Does anyone have a list of the
diagnostic codes? Can't seem to find them in the Haynes manual. Any help
would be appreciated.