| Thread | Last Post | Replies |
|
| Replacing "automatic" hubs with manuals ? | 16 Mar 2009 22:18 GMT | 2 |
97 Mazda B4000 4X4 (Ford Ranger with a Maxda nameplate) with switch on the dash that selects 2WD - 4WD HI - 4WD LO. I rarely use 4WD but with eight inches of global warming piled up on the road, I put it in 4WD HI and started out. After running into a ditch -- trying to avoid
|
| Another 4WD question -- 97 Mazda B4000 | 16 Mar 2009 21:49 GMT | 1 |
I posted earlier about problems with my 97 Mazda B4000 not going into 4WD. When I turn the switch on the dash to 4WD HI or 4WD LO, the dash indicator light comes on
|
| electrical issue in my cj, surprise! surprise! | 11 Mar 2009 13:25 GMT | 2 |
okay, i was having trouble with my tail lights not lighting, found a short and replaced them. All bulbs are the same wattage/amperage, but now when I turn on my signals, my engine lopes in time with the blinking. Also, I seem to be blowing the fuses for my tail/stop lights, and ...
|
| Request for buying advice. | 09 Mar 2009 09:16 GMT | 3 |
I am looking to buy a second hand 4x4. Hopefully under 10 years old and under 100000km (60000miles). I want it to be a manual transmission diesel and to be a good off roader.
|
| IH Scout | 08 Mar 2009 08:40 GMT | 5 |
Where can I get IH Scout parts, I stopped at a IH dealer and they told me IH sold everything to some outside Co. Does anyone have a name, address or web site for them. E mails welcome
|
| carb swap/upgrade '75 cj5 | 04 Mar 2009 20:20 GMT | 2 |
Hey there folks, I have a quick question...I am looking to swap out my stock YF for another, or possibly upgrade. I am currently having problems with the current carb and don't feel it is giving my enough on my 258. Not a huge engine, but the
|