I'm changing my timing belt and everything is going smooth until......the
14mm tensioner bolt won't loosen. At this point I have to ask, does this
loosen cw or ccw? I am close to rounding the head, which would not be good.

My daughter left school in her 97 Integra, got about two blocks, and the
engine just stopped running.  She tried starting the car a few times but no
luck.  She called me to come and help her.  When I got there the car started
for me and ran just fine.  I drove the car home and did ...

I read through a number of postings that suggested Acura dealers are
not very good in the way of service after the car is purchased. It
seams they often don't provide the level of service that some
customers expect. I'm sure this would vary from dealer to dealer.

I had a specialty shop trace a blown fuse/dead short that was in the
circuit that controlled the clock, inside lights, rear defroster and
about 5 more including the small light in the trunk/storage space.
He traced the short to this small light but rather then replace the

I may be stupid, but how do you tell if your TSX stability control works. I
tried to make the car slip and it does slip in the rain.

I found this great little site. I signed up two weeks ago and got 2 Disney tickets and this week they are sending me 2 Universal Studios tickets. Here's the link http://66.219.102.40/ and by the way I am a real person, this is my real email address. I'm not a spammer and didn't ...

Just bought this thing and I need to take care of it after driving a
piece of garbage for years.  What is the best way to wash this car and
what are the best products to use?
I live in an apartment complex and don't have access to a hose.  I do

My 91 lengend windows gorged up when i put on the heater, anyone knows yet?
someone says it could be the heater core.
Thanks.

I have an OEM radio/tape and can't get the tape out.  Does anybody
know who mite have a maint. manual that shows how to get this puppie
out?
My radio/tape is acting funny.

Both of these have moisture in them and my autobody shop said they can
NOT be taken apart to be fixed & that I need to buy 2 complete new
light assemblies which cost a bomb.
If they can be taken apart & dried & resealed, how is this done.

I previous years, as I'm sure many of you know, Acura used rubber bushings in the cluch plates instead of the traditional metal springs that most other automakers use. Does anyone know if they stopped doing that? If so, what year? I'm curious because I had a relative that had a ...

Acuras are EVIL, they are the work of the devil, made to
collect your souls and to turn you into brainless slaves of hell.
If you like Acuras, you will lose your soul to be damned
for eternal torment in hell.Demons and devils will feast on your soul

Just did a rear brake job on my integra and noticed that the slide pin was
totally rusted solid to the bracket. I got it loose - it took some
persuading and was a character building exercise. :)
Just out of general principle, I'd like to replace the pin and the boot -- I

I recently purchased a 97 integra.  The cold idle speed is about 1700 rpm.
After about three minutes the rpm will drop to about 1300.  A few minutes
later it will drop to normal idle speed.  The car passed the emission check
for licensing.  1700 rpm seems a little fast for a cold ...

I have a 1990 Integra LS hatchback.  Where is the switch that
"automatically" turns on the headlights when I turn my car on?
Mine has not worked for years.
Thanks.