| Thread | Last Post | Replies |
|
| can anyone help me!!! | 16 May 2005 05:42 GMT | 3 |
i have a 93 acura integra gs stick shift... when i try to turn the car on either it cranks but doesnt turn over or i turn the key n it doesnt crank ( like im not holdin down the clutch...)i cant figure out what it is....
|
| 1987 integra clutch problem | 16 May 2005 05:42 GMT | 2 |
Hi all I just finished replacing my clutch but for some reason when i connected my clutch cable i had to adjust it to almost the very end of the threads, as if my clutch is still old. its working right now but
|
| Tire Recommendations? | 14 May 2005 19:09 GMT | 7 |
Tire Recommendations? Specifically, I have a 1.7 EL (2001) - and I'm thinking of replacing the tires soon. size is 195/60 R15. Currently, I have the Bridgestone 685's. I'm thinking of replacing them because I've driven through a LOT
|
| WTB: Owners Manual 99 TL | 13 May 2005 23:09 GMT | 1 |
Anyone knows where i can pick up an owners manual for a 99 Acura TL for cheap the dealer is asking almost 70 bucks for it.
 Signature Posted using the http://www.autoforumz.com interface, at author's request
|
| TSX price | 13 May 2005 05:36 GMT | 1 |
What's the best I can hope to pay for a TSX MT without Navi? Several dealers in the area.
|
| Air from outside | 12 May 2005 14:35 GMT | 2 |
Hey guys, I’m getting smoke and all kinds of smells from the road, I’ve replaced the A/C dash unit (the buttons) thinking that my old one was the problems, not sending any response to the unit that closes the outside vents, any idea how i can fix this, preferable permanent, i
|
| an electrical Problem and a Cosmetic problem | 11 May 2005 22:16 GMT | 14 |
Hey guys I?ve got a 1990 Integra GS, with 140Ks, and i love this car, but I?m having2 problems: I start my car to go somewhere, i park, it wight or might not start, everything lights up, i wait sometime 5 minutes, sometime 2 hrs, i?ll
|
| oil pressure light | 11 May 2005 05:38 GMT | 4 |
I replaced the timing-belt and water-pump about a month ago. As of yesterday my oil pressure light comes on and stays on, after my car warms up. The thing is, it has oil and doesn’t overheat. 1990 acura integra Any help
|
| 2005 RSX | 11 May 2005 02:52 GMT | 7 |
I am looking to buy 2005 RSX with leather and auto. Dealer is looking for $200 over invoice about $20,900. Anybody have experience with the car, issues, comments. What about the pricing? That sounds good to me. Anyone do better?
|
| RSX-S radio stayed on with the key in the off position | 09 May 2005 18:54 GMT | 2 |
Once, when I turned the ignition key to off, the radio stayed on. Also, I closed the rear hatch and locked the doors with the key fob and the radio turned on. Any ideas what's wrong?
|
| leather dye | 09 May 2005 03:28 GMT | 1 |
Hi, my '98 Acura driver's seat is showing some wear/cracking that will probably require more that just cleaner/conditioner - I suspect a tint/dye product to fill in the cracks before conditioning. Has anyone attempted this and if so, where would you purchase the product?
|
| Integra GSR sensor question | 08 May 2005 01:51 GMT | 2 |
Does the Integra have a Mass Airflow sensor? Is it the Air Intake Temp sensor or the Manifold Absolute pressure sensor? Or neither? anyone have sensor contamination problems after installing a cold air
|
| Q. Acura vs. Toyota - Parts & Reliabity? | 08 May 2005 00:02 GMT | 27 |
I need to make a decision quick between a 93 Acura Integra RS and a 96 Toyota Tercel (both about 188,000km on the odometer). I know they are very different cars, and both have their appeal to me. I prefer the comfort, performance and feeling of security (from accidents) you get
|
| 1988 ACURA LEDGEND 2.7 | 07 May 2005 04:08 GMT | 5 |
I HAVE A 1988 ACURA LEDGEND, CRANKS GOOD BUT DOES NOT RUN UNTIL I SPRAY STARTER FLUID OR CARB CLEANER IN THE THROTTLE BODY. HELP
|
| Deciphering the igniter... | 05 May 2005 05:42 GMT | 22 |
Having successfully decoded the PGM-FI Main Relay's DNA, I'm now on the warpath for the Igniter, in preparation for another update to the FAQ. Some basics: 1) The igniter simply replaces the old make/break points in a Kettering
|