Can anyone point me to a good explanation of how to remove the glovebox
in a 2005 TSX?  I have a few pictures which are supposed to illustrate
it,  one form the Temple of VTEC,  and while I can detach the hook-arm,
flexing the box seems like it will beak the plastic if I apply ...

Need help with 97 Integra ls.. When I press the clutch to the floor I
hear a slight grinding noise similar to the noise the ABS makes. Also
it is difficult to get the car into 3rd and 4th gear, then grinds in
5th. If I only push the clutch half way the shifts are pretty smooth.

I've had the car almost 2 years now, but only recently have had to use
the nav system intensely.  I've encountered two interesting things,
both might be bugs:
1.  If I set the illumination intensity to "Auto" and leave for work

I was wondering why do most cars that I have been in (mostly honda's)
have a much better brake bite and grip than after driving it for a
while, like when i first start the car and pull out, the brakes seem to
be working much better than after the car has warmed up and such....

Yeah I bought a 96 integra LS...Well before I bought it, it use to be
and Automatic and the owner converted to a Stickshift.Well it started
out fine with the LS motor.But when I swamp the motor to a GSR it
can’t start no more.Right when you turn the key ignition all you can

This problem is similar to a post of a few months ago, but not quite.
Here are the details.  88 Integra RS, 120k.  Recent air filter.  Plugs
not new but okay.  Could probably stand a cap and rotor.  It has great
difficulty getting started.  This problem has been getting steadily

I am getting rid of a Subaru Outback 3.0 VDC 6-cylinder car that has a BAD
hesitation problem, that Subaru can't or won't fix.  I am looking at the
2007 Type-S, and, test drove one last week, and, it seems very nice, and, NO
hesitation.

Hi guys, i've got a 1999 acura 3.2 TL with 172,000 miles. Just bought
it from a guy that has maintained it very well and im quite happy with
it.
The only issue that seems to be bothering me right now is that when im

I have a 2006 MDX. I just ran over a sharp piece of metal that logged itself
in one of my rear tires. Of course it created a flat. My question is does
anyone know the parameters for using a plug (or patch)? The tire has about
3000 miles on it and other than a small gash in the ...

I have a 2007 MDX with 500 miles on it so far. It has the sports
package (& hence the tech package). .
I usually drive very calmly & sedately.
Today, on the highway, I had to accelerate in the entry lane to et out

I have a 1998 Acura 3.5 RL
The engine is absolutely quite - when on neutral. i even tried putting
car on neutral & with brakes pressed increased the RPM till 3000 - and
there was no vibration.

I have 2001 Acura Cl with Navigation. I was wondering does any body has a up to date ( at least newer than mine ) DVD ? Or where can I get reasonable priced SW.
Thanks

my passenger side wiper blade stopped working. sometimes the passenger
blade will work and cause the driver side blade to bend when converting
with eachother. what can i do to fix the problem? is it just a bad wiper
motor? or is does it have something to do with the timing of the ...

diagnosed nonworking blower,radio to  faulty ignition switch
acc,batb,ig2b is open in key position 1. based on acura test
mechanicals are ok.
acura manual says i need remove the 2 shear bolts holding

I just chimed in on the earlier thread with a cold weather related question
regarding tire pressure and have another.  This week in CT we've finally
dropped into the high twenties low thirties for temps.  In addition to my
tire pressure guage going off I've noticed something else ...