| Thread | Last Post | Replies |
|
| WHAT CAN BE INSPECTED WHEN REPLACING CLUTCH RELEASE BEARING? | 16 Apr 2007 21:15 GMT | 4 |
2006 RSX-S, 20K miles My car is going in soon for an already diagnosed replacement of the clutch-release bearing. I would like to know what components are accessible or relatively easy
|
| The back window Brake light | 16 Apr 2007 14:37 GMT | 5 |
I have an 2001 CL which has the following problem. The Back Window Brake light does not light even though the rear Brake lights work and the spoiler brake light works. In addition the Cruise control has become inoperative. Any ideas as to the cause
|
| Battery Upgrade | 15 Apr 2007 20:41 GMT | 2 |
2004 TSX This may be a really stupid question, excuse me, I want to replace the crappy factory battery I'm looking at Optima YellowTop (D35) (deep cycle)
|
| '01 TL noisy windowsheild wiper blades! | 14 Apr 2007 02:19 GMT | 6 |
I've tried every type of replacement windowsheild wiper blade I can think of but they are ALL noisy! Anyone have a solution? This drives me nuts....
|
| ATF Flush at 26K ? | 13 Apr 2007 21:43 GMT | 12 |
04 TSX AT @ 26K The car is overdue for 25K (or 20K ?) service Should I do a full ATF flush/change ? And can any ordinary, non-dealership shop do this ? (meaning do they has the
|
| How to skip navigation system warning page? | 13 Apr 2007 20:31 GMT | 2 |
My 2004 Acura RL displays a navigation warning page when it is starting up. I requires that I press OK before displaying the map. Is there a way to have the system go right to the map after boot-up? Thanks,
|
| Erradic automatic shifting '94 Integra | 12 Apr 2007 03:42 GMT | 5 |
Here's another one for you...I've had this 94 integra for a couple of years now, and since day one it has shifted funny. I guess you could call it a "spike" in the shifting - where the rpms come way up, then drop and allow the transmission into the next gear...really annoying. ...
|
| Wiper FAILURE 94 INTEGRA | 11 Apr 2007 16:35 GMT | 3 |
Just jumped in my car today and tried to turn on the wipers...NO GO. The fuse for the wipers/windows/washer is working because the washer and windows still work. I can also hear a whirring/whining noise when I attempt to operate the wipers. Is this a stripped gear in the assembly ...
|
| Washer Nozzle Aim | 10 Apr 2007 02:27 GMT | 1 |
Can windshield washer nozzle aim be adjusted (out side of shop) ? If so, how ? The aim on my TSX is a bit low. BTW, what should be the proper height ?
|
| '06 RL Whining Noise | 08 Apr 2007 21:27 GMT | 1 |
Anybody heard of this problem? Our '06 RL started making a high- pitched whining noise that kicks in at a certain speed (varies, but mostly around 40-45 mph), increases in pitch as the speed increases, then diminishes in pitch as speed falls off, stops when speed goes
|
| Type S | 08 Apr 2007 21:23 GMT | 5 |
I really like this car but those wheel leave a lot to be desired. Why make a wheel that is so dark as to appear as if it has brake dust all over? Can anyone recommend a nice chrome wheel other than from Acura? Thanks in advance.
|
| cost to change car locks | 08 Apr 2007 18:47 GMT | 1 |
If you lost your car keys near your house, roughly how much would it cost to have the dealership change your car locks? I imagine it'd be pretty expensive, 2 doors, trunk, ignition, microchip code? Any idea how much that would cost in the US?
|
| Should I disconnect the battery? | 08 Apr 2007 18:43 GMT | 1 |
I have a '98 CL with a failed CD player. The radio and cassette deck still work fine. I have a replacement radio unit from Ebay which I would like to install but I am uncertain about whether or not to disconnect the battery before proceeding. I'm not sure what the risks and ...
|
| Timing belt question. | 08 Apr 2007 14:41 GMT | 12 |
My stepson has a '99 TL with about 108,0000 miles on the odometer. I keep after him to have the timing belt replaced. My question: Is the Acura engine one of those where several valves are broken when the timing belt goes or is the worst that can happen is that it will have
|
| tempature does not change | 06 Apr 2007 15:28 GMT | 1 |
i have installed a blower motor and now the tempature will not switch from hot to cold .. but blower motor works fine.. just stays on hot air ..could it be a fuse or a relay switch and if so .. were do i find it to replace it
|