We are selling HID CONVERSION KIT , Ballast and the related product,
please come to our website and check it out!!! Our business is your
business!!
WWW.BVSTATION.COM

On the left half shaft, between the inner boot and the transaxle, there is a
cast iron support bracket with three bolts attached to the body frame. How
do you slide the shaft out from this support? I ended up removing the
support and shaft as one unit.

I have a radiator leak, would you recomend fix it or replace it?
Thanks,
Guillermo
Grand Prairie, TX.

Want to remove the half shaft to replace the inner CV boot. Need to remove
the front hub nut on the front wheel, right? This nut is held on the shaft
with what looks like a key slot with part of the nut is crimped into the key
slot keeping it from coming loose. Do you need a ...

Both driver and passenger side heating pads have failed, or I noticed that
they broke, at the same time. Since I use the driver side more than the
passenger side, I find this unusual. I did check the wiring connections
under both seats and they seemed to connected properly. I did ...

105,500 miles
Blue coupe on blue interior
4 Cylinders Manual, 3 door, FWD
A/C: Front, A/C: Rear, Cruise Control, Power Locks, Power Steering,

I called Acura and was told the charge for an updated map is something
like $200.  Is the software specific for Acura, or can I go on-line to
find it cheaper?  If the later, what should I be searching for?
This is for an '06 TL.