How is the tubing part of the exhaust fastened/fitted to the cast flange
that bolts to the head? Pressed? Welded?
I bought a set of used manifolds on eBay and one of the flanges has a little
bit of play. Other than that they are in good shape. Is this still useable

I have a 1987 Fiero GT in which I would like to refinish the interior
trim.
I am having trouble removing the section surrounding the automatic
transmission. I have everything unscrewed - but I can't left the trim

First post.. Got my first Fiero last summer.. then got another FREE
Considering I had already started the full restoration on #1 and parts
were all over I decided to make something different.. a CONVERTIBLE..
Anyways to make a long story short..

To our usenet friends on Christmas Day:
Well, our faithful contractor has been beavering away while we were off
the boat having surgery and rehab, and, sad to say, it's impossible to
convey via pictures alone, how marvelous the boat looked when we

Just got off the phone with my kid.  He says the engine on my 84 Se is
hard to start.  He doesn't get the whirr of the fuel pump with key on,
but after he winds it for a while it will start.  I told him the fuel
pump relay is probably acting up and the engine spinning gets enough

HELP PLEASE!  Have replaced the a/c lines on my 87 fiero 2.5L 5 spd
trans 3 times the aluminum part of the lines right behind the a/c
compressor keep breaking. No unusual vibrations; and all mounts are
good ;and have been replaced just to be sure; compressor mounting is

Hi guys, Anybody know how much fluid the 88 5 speed Muncie holds? The
Chilton's book claims 2 quarts but I am barely on the stick with that and
need to go buy more! how much? Wonder what else is wrong in that book.
Thanks