Has anyone had this done or heard anything good/bad about it? It is supposed
to be a urathane film they apply to your bonnet to protect the paint work on
your car. If you get it done, you won't need to go around with a "car bra".

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4146756343 your style
of writing :_)

Anyone know of a good place/price for low k Jap import motors in Perth?
Regards,
Clockmeister.

Ten Lessons My Father Taught Me
===============================
1.  Pay your bills on time and the bank will make you another
   loan when you need it.

the reason i beleave these car are not avaliable in australia is
because they suck put this on A track with a holden, the holden would
kill it. the only people you see driving a skyline are want to be fags
who think there cool

Just got back from about a week away of touring - did a few thousand k's
around SEQ and NE NSW.  Visited some very beautiful countryside on the way.
Also, a couple of things struck me about differences in the 2 states. I've
seen NSW fixed speed camera's before - with several big ...

Noticed something while trying to suss out some rough running when the Ford
V8 is on LPG.
When the engine played up, I found shorting or bypassing the coil ballast
resistor made the rough running smooth considerabley.

I own a TA22 Celica and currently have a problem as i have no compression at
all in cyclinder 2. As well a a very loud rattle coming from the engine.
Wondreing if anyone could tell me a possible problem with the engine as
trying to determ if it's worth fixing or not.

hey all
ive got a vh commodore which id like to spruce upa bit and  just wanted to
know will vk parts  ie: ( bumpers grill tail lights ) fit straight on my vh
or do i have to do a few mods

My battery went dead today, after 3.5 years of service.
How much is a fair price for a new battery? I have paid $150 for non-genuine
and $40 install. I tseemed expensive, but I haven't bought a battery for
ages.

I have a split in the join of my extractors  and a very large hole in the Y
connector.
I have narrowed down 2 brands..Pacemakers & lukey's
Anyone have any thoughts on these extractors in terms of build quality &

   Sure sounded like it, I was leaving work tonight & heard tyre spinning
as the old stocko crap bucket turned into the street, then unlike a normal
burnout the tyre noise just faded drowned out by futher rising engine rev's,
at about the 100m mark the revs stopped climbing and ...

Tyrwhitt !
TYRWHITT HIMSELF ?
Is that really you,  fucken shithead crook ?
Not surprising good Jenny run away, bloody cowardly manure ... I  noticed it

1963 EJ Holden (Modified)
179 red motor (40,000km)
High compression head
Stainless Steel valves

when did the rover vitesse v8 become efi and/or unleaded?