Can anyone here point me towards someone who can sell me some throttle
plates for Mikuni Solex 44PHH carbs?  I need at least four.  I'd be
interested in getting more, if possible.
On a seperate note, does anyone here know someone who can do custom

HI,   If you are not using it YOU are wasting at least a litre of
fuel   for every 100ks you drive for the rest of your life.Check it
out www.fitchcatalyst.com.au  click on the horsepower t/v and see for
yourself???Then check out all else on the site,you are also emitting

Short sbs program this arvo about drags on a southern strip mention was
made of a 6 pot rex ( transplant)
 of a normally asperated suby motor into the quickest rex in the world
 seemed to be a melbourne  sickbro ethnic with a huge  turbo added

On the loco news.. Smoke in Q1 turned out to be a diesel generator. Was
it the Dawggie using his diesel powered laptop :-)  
Al

However it's bothering me.
The <-North-South-> <-South-North-> signs every 20 meters
stuck to the walls in the Shiteney Harbour Tunnel. I just don't get
it.

Anyone have any info on the Renault diesels they are using in the Kia
Sorrento? I also hear Honda will soon be outsourcing diesel engines for some
of their new models. Yet Falcadores still, are not interested.
I also hear, most if not all LPG fitted vehicles (not standard fitment) ...

I've welded up something using that steel tubing that always comes painted
blue. The powder coaters recommend I take the blue paint off. So far i've
tried using thinners, electric wire brush, sanding disks and an orbital
sander. Some work well but leave marks on the metal, others ...

http://cgi.ebay.com.au/FORD-HUB-CAPS-1960-ON_W0QQitemZ170193379822QQihZ007QQcate
goryZ6763QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I have a set the same as the above, and would like to find out what model
they are..... see them on eBay now and then and they don't seem to be worth
much.  ...

invent an engine that say, is 6cyl, when on the highway at cruising speed
and not labouring (or liberaling) have some kind of device fitted that drops
the fuel inlet to say 2 or 3 cylinders to conserve fuel and then when the
power was required again switch to extra an cylinder or ...

For those of you asleep this blokes post is poison
 if you do reply be aware it is an email collection scheme

WHY DONT YOU f.ck OFF WITH YOUR CONSTANT BULLSHIT?.
WHY DO YOU CONTINUE WITH IT ? YOU HAVE ZERO CREDIBILITY AND NO ONE
BELIEVES YOUR CRAP
ALTHOUGH YOU ARE TOO MUCH IN LALA LAND YOU ARE STUCK IN A CONSTANT

To : all car LOVER'S
Reducing Fuel use and Increasing your car  speed  with FFI MPG-CAPS
and maximalizing your engine performance without engine corrosive -
100% quarantee with insurance $1 million  (all function can be proved

How do I get the RH (drivers) side cv shaft out? I can't get the nut on
the end of the stub axle undone! What is it torqued up to??

http://www.youtube.com/watch?v=lKbpRJXAwAw
f.cking Corgi are more advanced that BMW, Mercedes and all those other car
makers in R&D it seems :-)

went to get some prices for rear tyre for the Ford today
I want 245/45/17
I was offered 235/45/17
I was then told I should take the smaller tyres because the larger tyres