Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Australian Car Forums / General Car Topics (Australian group) / October 2009

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Sea levels31 Oct 2009 13:44 GMT-
http://nzclimatescience.net/images/PDFs/spsl3.pdf
Dad
Unidirectional tyre - back to front.31 Oct 2009 09:25 GMT34
I have just had a second hand tyre fitted to tide me over as I was stuck
interstate when the old tyre had a catastrophic sidewall tear.
I got lucky at the first second hand tyre store I came across had a matching
tyre
Any Toyota experts out there,...plse30 Oct 2009 09:47 GMT7
I have a dilemma. The Camry has 2 hydraulic engine/trans mounts, one at the
front and back, and a 3rd side-mount which is rubber. It is really a double
mount with a sandwich mount each side to limit backwards and forward motion.
Trouble is, the engine is rocking too much and has ...
Are you a carbon hog?30 Oct 2009 00:09 GMT132
Used up all mine in 1.3 years....
http://www.abc.net.au/science/planetslayer/greenhouse_calc.htm
It should be called the crap they're feeding our kids!  :(
Windows7 for $29au - DVD29 Oct 2009 12:17 GMT10
Windows7 32 and 62 bit available for $31
Full working software
Free Postage to any address in Australia
Email Suzanne on suziequtie33@hotmail.com or call +61408661601
For those who're into leather!29 Oct 2009 11:46 GMT19
Anyone got any advice as to regular maintenance and the best products
to use?
Car and lounge both stand to benefit, and they're ivory coloured (if
that matters).
Online Insurance Quotes29 Oct 2009 01:29 GMT5
Has anyone tried Youi online quoteing system?  basically if you have any more than three simle mods
they will not insure you.
I tried it with:
Alloys </= 2Inches larger than stock
Incredibible: 767 joins the dragsters literally!28 Oct 2009 18:16 GMT5
http://www.wadenelson.com/gimli.html
The 767 was at 41,000 feet and some 80 odd miles from Winnipeg when it ran
out of fuel. The only source of electrical and hydaulic power (latter to
operate *some* control-surfaces) was a small wind-generator which dropped
It's a diesel.... You know28 Oct 2009 13:47 GMT12
Injector pump on the Landcruiser developed a leak
drop every 2-3 seconds at idle, doubling at highway revs
So time for a repair
called a few places
mitsubishi boss says holden,ford and toyota is doomed to failure28 Oct 2009 13:37 GMT17
http://www.carpoint.com.au/news/2009/large-passenger/ford/australian-car-making-
on-the-limit-17156

smart person
Is Gordon Lighfoot candadian?28 Oct 2009 02:44 GMT1
Kelpie took a photo of Gordon cuddeling Springy.
Is that a canucka flag on Gordo?
http://farm2.static.flickr.com/1150/1315418726_688d252c51_o.jpg
Springthorpe pointing out his favourite building?28 Oct 2009 00:57 GMT1
U &#9829; Sydney dat much hey?
http://farm4.static.flickr.com/3593/3663916406_3f08432a44_o.jpg
Noise cancelling in Accord27 Oct 2009 20:43 GMT12
The guy at Supercheap informed me the current Accord has a microphone under
the bonnet to pick-up engine and perhaps some tyre noise is reversed in
phase, then fed intp the car-audio to effectively cancel the same noise in
the cabin (two signals reach the ear at the same time, ...
Bridgestone in Australasia27 Oct 2009 12:07 GMT70
"Australia's last tyre manufacturing plant, Bridgestone Australia's facility
in Adelaide, will close within six months, spelling the loss of 600 jobs.
Bridgestone Australia said the decision to close the Salisbury plant, in
Adelaide's north, and a plant at Christchurch in New ...
For Athol and everyone that thinks ...27 Oct 2009 10:38 GMT146
I have a highly illegally modified vehicle ...
Guess what - it just passed QLD rego.
And I was correct, had a loose but not stuffed
engine mount causing a bit of clutch shudder
Pages: 1 2 3 4 5 6 7 8 9 September, 2009
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.