Help & Advice please. I have a 1995 "old type" Cabriolet - 2.6 V6. The
rubber bushes on the lower front suspension "wishbone" have completely
gone and must be replaced. Is this a DIY job ? On the face of it, it
looks fairly straightforward as the lower ball-joint can be unbolted

i have a 97 audi a4 2.8 awd and i need to replace the side marker, front
corner lights, and need to take the tail light out? also, i got a cd
changer install at circuit city, ever since then my radio would not work.
even when i brought it to the dealership and paid $40.00 to get the ...

I was looking at eBay for ISV for my 5-cyl '89 Audi 100. There are few,
but the ones that look like the one I have in my car have BOSCH part no
0 280 140 512 and 0 280 140 516. They look exactly the same (on eBay
photo).

Can anyone suggest a cure for my UK Audi 80, I am at my wits end.
When pressing the brake pedal, the pedal was occasionally going nearly to
the floor, when pumped twice it would be OK and the brake pedal pressure
would be fine for days, I replaced the master cylinder with a new one ...

Has anyone tried to instal a webasto heater in a audi a6 2.8 V6 1996
engine compartment ? any tips or tricks ? is there room and where ?....
Thanks very much !!
langesteff

I am having problems with a persistent noise which has developed over
the last 8 months on my 02 1.8T A6 47K which has the multitronic
gearbox installed.
The nature of the problem is that when I accelerate between the 4,000

I dont have the service manual. Can anybody give me any suggestions as
to the best way to go after it?
Any help would be GREATLY appreciated!!
Megan