| Thread | Last Post | Replies |
|
| Door Skin & Driver Fender | 31 Aug 2006 22:12 GMT | 1 |
1992 Audi 100CS. Light Silver color. I had a "uh-oh" a while ago and smashed my driver side fender and driver door skin right where the two meet and they're crunched pretty good for 8" or so on either side of the seam where they meet. where is a place to get these parts repalced
|
| Needles jumping and lights flickering on A3 dash | 31 Aug 2006 21:27 GMT | 4 |
I have a 2001 (X) Audi A3 1.8 SE and I'm having a problem with the dashboard lighting and speed, rpm, fuel and temp dials. Initially from a cold start (despite the warm weather) the needles were jumping back and forth and the rpm and spedo backlights flicker. The
|
| Are we getting ripped off | 31 Aug 2006 21:00 GMT | 1 |
We recently had some trouble with the AC in our 2002 Audi A4. When we turn the AC on, the car shakes violently (Radiator/compressor trouble?). we took the car to the dealer who initially claimed that a rock broke the cooling fan and upon questioning that claim, the service
|
| Is new A4 1.6 litre too weak? | 29 Aug 2006 18:03 GMT | 3 |
Hi to All, I think to purchase new A4 with little weak 1.6 litre motor,so I want to know what you guys think about it. Every good or bad opionion is welcome!
|
| 01 TT Clock | 29 Aug 2006 17:43 GMT | 1 |
I don't have an owners manual and I need to set my clock. I have tried to figure it out several times with no luck. Can anyone help me??
|
| 1993 90CS - License Plate Light On / Alarm System Goes Off | 29 Aug 2006 04:32 GMT | 5 |
Two Things: My LIcense plate lights and trunk light are always on. My Alarm System Goes Off Randomly (I pulled the horn cable, now it just blinks)
|
| 2002 A4 service light | 28 Aug 2006 20:04 GMT | 11 |
anyone know how to turn the service light off?
|
| 1998 Audi A6 tdi fuel line filter priming? | 28 Aug 2006 18:52 GMT | 3 |
Please can someone help. I changed the filters on my A6 yesterday, air filter, oil filter and fuel filter. Now I have changed the fuel filter, I cannot run the car, it started on
|
| struts for 98.5 A4 2.8Q | 28 Aug 2006 13:45 GMT | 6 |
I think my 98.5 A4 2.8Q needs new struts at 102,000 miles. The rear tires have excessive wear on the inside of the tread (the car had a 4-wheel alignment in May 2005), plus the ride has been a bit noisy. The struts now on the car are from the factory and have definitely
|
| Audi 80 2.6 E Auto stick in "sports" mode | 28 Aug 2006 11:25 GMT | 1 |
I have just purchased a 1993 (L) Audi 80 2.6 E Auto estate that runs well but seems to be stuck in "sports" mode on the automatic transmittion. The light on the "sports" button is always on and will not go out when the button is pressed. Sometimes when starting out on a journey I ...
|
| Audi A3 Sportback Interior Colour. Help! | 27 Aug 2006 13:31 GMT | 8 |
After 6 months of humming and hawing I have finally taken the plunge and purchased an A3 Sportback 2.0T FSI, which I will be taking delivery of in January 2007 (We have a huge back log here). Now the next big decision to make is the colour. I have decided on the
|
| 1987 Audi 5000-steering rack leaking-using additives? | 26 Aug 2006 21:42 GMT | 1 |
Question: The Audi 1987 5000 takes a special Audi recommended Pentosin CHF 7.1 Mineral Oil for the steering rack, etc. When the seals are leaking, has anybody ever found an additive to
|
| broken speedo cable end still in transmission | 26 Aug 2006 00:00 GMT | 2 |
I have a 1984 4000cs. The speedometer cable broke and left the end piece in the transmission. Is there a way to get it out without having to remove the transmission? I have a repair manual for this car but it seems to be lacking in some
|
| AUDI 1997 A4 - Noisy bearing | 25 Aug 2006 16:03 GMT | 12 |
Okay, so I know I have to fix the bearing otherwise my wheels might fly off. I took my car to an Audi dealer and they said it will cost about $700 to fix both sides.
|
| Trouble code 18010 Power supply (B+) Terminal 30 - Low voltage | 25 Aug 2006 13:34 GMT | 3 |
I recently noticed the check engine light was lit in my car. So I bought an engine scanner to see what the problem was (I thought it was the MAF). But the scanner read: 18010. In the the manual, that came with engine scanner ( I don't have my
|