Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Audi Cars / June 2009

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Catalytic converters23 Jun 2009 04:23 GMT6
Well, it sounds like my '98 A4 2.8 needs new catalytic converters.  
Has anyone replaced them themselves?  The dealer here wants about
$1500 per side...
Oh, yes, I'm in California, USA, so all the 49 state legal ones that I
VW Polo Anti Roll bar - Front.13 Jun 2009 07:14 GMT5
A Dealer is quoting £250 to replace the front anti roll bar assembly.
A third party (known) garage is quoting £100 while using original VW parts.
any comments on using the third party.
thanks
Audi Front hub A6 199607 Jun 2009 14:56 GMT2
Does anyone have information regarding the removal / repair of the
front hub on a 1996 A6?
A5 - Cannot Remove Master Key from Ignition07 Jun 2009 14:37 GMT2
I have a new 2009 A5 with smart key. With the car turned off,  I
placed the key in the slot to power close the windows.   Following
this, I could not remove the Master Key from the ignition.  I tried
pushing in and pulling out the Master Key beforre removing, but no
Audi says: no electric concept for Frankfurt!03 Jun 2009 05:13 GMT1
A few days ago we reported that Audi would be bringing an electric powered R8 to the Frankfurt Motor Show. However it is our sad news to announce that according to representatives from the German automaker, the speculations have been denied and there will be no battery operated ...
Audi A3 pressure build up in petrol tank02 Jun 2009 15:45 GMT2
I hope someone might be able to advise me - I have founf various posts
relating to the Evap Emmissions systems on these systems but I don't
think these help me - they refer to flooded carbon canisters or faulty
purge valves but it seems to me that the blockage is closer to the
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.