I have a 1979 Ford F-150 with a 400m. There are a few extras on i
including:Edelbrock Performer 400 intake manifold, Edelbroc
Performer Series Carb(600 cfm), MSD Billet Distributer(centrifuga
advance), and a MSD Ignition Control Module(6a) and so on. I als

How do I know if the oil is full on my car?  About a year ago I bought
a car and last week I was reading on a website that I am supposed to
check the oil.  The gage on the dash says "OIL" and it goes from L on
the left to H on the right.  I can only guess that the L means LOTS

I have a rv that has a car radio in the wall, i am putting in a new car cd
radio where the old one was, they have it wired as common ground, can i
hook the new radio up as 2 channel vs 4 channel, otherwise i think i have
to rewire the speakers so it will work with new radio? im ...

my friend has a mazda rx7  and hes trying to get me to buy it the car
is in great shape but the only thing is at 4500 rpms it has a skip in
the engine does any one know what it could be. I’m not real positive
on the year or any thing else. I was wondering is this something that

Hi there. I just purchased a 2001 F-250 superyduty ( My first diesel )
and was wondering about the fuel conditioner. I read in the owners
manualy that it is not recommended. I live in northwestern Canada
where temperatures range from the 90’s in the summer and in the - 40s

I am in the market for used cars and was checking out Yahoo! used cars.
Some of the prices of it really baffled me and I am just looking for
some opinion on it.
I will post a couple of links:

i’m hoping to get some advice and suggestions.  i’m moving from
portland, oregon to ithaca, new york at the end of july, and i’m
looking to buy a used vehicle to make the move and then survive a few
years of driving in ithaca.

I'm wondering if it is worth it to buy a AAA membership for the roadside
assistance.  I have a Citibank Mastercard, and they have something called
"MC ASSIST", which provides just about the same services that AAA offers --
jump-starts, towing, gas delivery, and tire changes (not ...

   I took my car for brake service for my 98 Isuzu Rodeo 2WD. I asked about
for the front wheel with disc brake. The mechanic told me since it is a 2WD.
It requires to take out the bearing to re-surface the rotor. He said it is a
must to re-surface the rotor, otherwise the new pad ...

   I have a Consumer Reports Used Car Buying Guide, the current
one... which only goes as far back as 97. However,  I am shopping for
a car that will be older than that (around 1992 probably).  Does
anyone know how I can get a back-issue of this that covers EARLY 90s?

I have a 1994 Mazda Protege.  In January, I had my mechanic replace my
compresser with a rebuilt compresser (only needed it to last 1 year), New
Drier/Accumulator, and switched to the R134A system.  I was in heaven
after driving around Texas heat for 1-1/2 years without!

I have a 1999 cavalier 2.2 4 cyl with 108,304 miles. I was advised to do a
compression test and did but am not sure if the readings are ok for my
car. The readings are 120 for first three and 135 for last one. Does
anyone know if these are good?

i have just bought a 92 buick skylark and have reason to believe the oil
pump is shot. the question here is that i removed the oil pan, starter,and
the belt and tryed to get the bolt out and cannot get it. having a problem
keeping the motor from turning and when did get it to stay ...

Just bought a new GMC pickup (silver) and I'm wondering if it's wise to wax
it or should I wait a certain amount of time first?
John

This rant is to give advice to any and all of you that are forced to deal  with the Collins & Aikman Corp,  Old Fort Engineering Center on a day to day basis...............
The key problem with this facility is the Plant Manager,  Jim Flood.
We all wonder how this souped up redneck ...