| Thread | Last Post | Replies |
|
| e34 advice please | 16 Jan 2006 11:42 GMT | 4 |
Just a simple question :) My 1996 e34 520i SE Touring is my second e34 and I seem to recall the 1st one had the cold/hot thumbwheel on the upper centre dash fresh air vent lit at night time.
|
| E30 running rich? | 16 Jan 2006 10:19 GMT | 11 |
Our 320i runs fine but I have suspected for a while that the mixture is a bit rich. The exhaust smells quite strongly of fuel (noticable with the windows down when stopped), even at the end of a long run. Also the consumption is quite high, I estimate around 20mpg (imperial) on a
|
| 83 BMW 320i Running Hot | 15 Jan 2006 20:59 GMT | 1 |
I have 1983 BMW 320i that runs hot in start and stop driving, I have replaced the thermastat and flushed the Radiator. The car was sitting for 7 years prior to me buying. Any suggestions would be greatly appreciated.
|
| 91 old shape 316 wont start | 15 Jan 2006 16:58 GMT | 7 |
Hi.....316 wont start. turns over fast. fires now and again but wont start. The drum 'thing' under the car nearside in front of the rear tyre was tapped....then it fired...ran...and stopped.
|
| Dash Computer Clock stopped working | 15 Jan 2006 14:25 GMT | 3 |
Whilst removing Stereo, the clock side (RHS) of my computer display stopped working (completely blank as if no pwer). The LHS works fine. I've disconnected & re-seated the main connecting plugs to no avail. Anyone know how what else I can look at?
|
| BMW E30 318Is what mean... | 15 Jan 2006 14:09 GMT | 6 |
DME relay what this relay do?
|
| Where do i find bmw clubs? | 15 Jan 2006 13:53 GMT | 1 |
If you know about some bmw clubs in different countries in europe, please let me know.
 Signature Earn money while you enjoy your life
|
| differences between 2 litre e34 and e39 engine blocks | 15 Jan 2006 13:14 GMT | 4 |
Does anyone knows for sure that 1997. 520i e39 engine block can be substituted by an older 1994. 520i e34 block? Issue is that e39 has Nikasil treated engine bores and on the 5th cilinder it has a failure. I have a chance of getting e34 520i block very cheap so I was wondering is ...
|
| WTD: E30 316i manual gearbox (UK) | 14 Jan 2006 19:59 GMT | 2 |
Wanted urgently: E30 316i 1989/90 manual 5-speed gearbox. Or indeed 8any* manual box which will fit this car. Cash waiting. Can remove & collect if required. cheers,
|
| grey market 533i | 14 Jan 2006 17:46 GMT | 5 |
I just found out (by sending my vin number to BMW) that my 533i is grey market, or not made for the US market. Does that mean that my car is actually different from the ones made for use here in North America? Is it worth more? It is still quite peppy for an older car. I may ...
|
| BMW 750 V12 | 14 Jan 2006 17:44 GMT | 3 |
Can anybody tell me if a manual gearbox from a 1989 730 wil fit the 1992 v12 engine if not does any other Manual box fit what are the complications of doing so? Paul
|
| No Battery Voltage to Starter | 14 Jan 2006 17:41 GMT | 1 |
My daughter's 1995 318i crapped out again. She said the idle was a little erratic, then the car stalled. The car had been running for about half an hour by that time, so it was at operating temperature and she had no problem initially starting the car this morning. After the ...
|
| Getting codes from 87 325is | 14 Jan 2006 17:38 GMT | 9 |
I'm trying to read the codes from an 87 325is but the trick of depressing the throttle to the floor five times doesn't work. Is there a different trick for this year vs my 89 325i? What switches should I check as I'm thinking one or more isn't working. The TPS sensor has
|
| Looking for part # 92 e32 -- the tray that holds the wires for fuel injectors. | 13 Jan 2006 19:40 GMT | 1 |
pictured here: http://www.jassing.com/josh/images/bmw/injectortray.jpg Does anyone have a part # for that (there's actually 4 parts -- the cap, the tray, two round caps & two spacers inside of it. Thanks
|
| E46 Schematics? | 13 Jan 2006 16:58 GMT | 3 |
Is there someplace I can download electrical diagrams for a 2000 BMW 323Ci? If not, what is the most cost effective way to get the electrical diagrams? I don't want to spend a fortune on a shop manual. I'm trying to figure out why my license plate bulbs are permanently on
|