Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / BMW Cars / August 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
E46 Airbag Light11 Aug 2006 18:27 GMT6
My airbag warning light was flashing on and off for a little while recently
but over the last couple of days, it is now on all the time. I have a 2000
E46 323Ci. Any ideas. I hear airbag related stuff can be expensive.
Thanks
BMW 3 SERIES CONVERSION11 Aug 2006 17:56 GMT2
HI,I JUST PURCHASED A BMW 316i AND NOW I NEED TO CONVERT IT INTI ONE
MEAN MONSTER WITH A 325 OR 328 ENGINE(if i can find one).The door
panels are damaged and i would lyk tobuy new ones,cud u guys tell me
were i can find them.im in botswana n we buy most of our spares in
Cooled seats11 Aug 2006 16:09 GMT4
Heated seats have been around a long time, but when did "cooled" seats
first appear?
The first time I remember hearing about them and thinking " Oooh,
nice!" was on a MB S-class 2 or 3 years ago.
Eclipse clutch11 Aug 2006 14:36 GMT1
Sometimes the clutch will ingage and sometimes it will not. When it
does'nt it seem the pedal is loose. After a few minutes the stiffness
returns and it shifts fine. Any ideas?
Oil Filter11 Aug 2006 14:15 GMT16
Have a 2000 BMW 323 CI.  Just found out my old mechanic closed up shop, and
everyone else wants $100 plus to change the oil and filter.  Can any one
tell me approximately where the oil filter is located on this car.  Hubby
says he will see if he can change the oil and filter.
1970 BMW 280011 Aug 2006 14:13 GMT1
The parking brake on my BMW 2800 broke and now the car only moves in
reverse because the brake (left rear) is still engaged. Any ideas on
how I can fix this? Thanks.  Craig
Lowering a 2002 330xi11 Aug 2006 03:24 GMT4
If I lower my xi, will my same size tires and wheels still fit?  Going
to lower it about 1.5 inches.
Tom
E39 - rubbing noise from NS rear wheel10 Aug 2006 20:55 GMT2
Any suggestions what might be causing a "rubbing noise" from the rear
wheel? Tyres are not new. The noise is definitely speed-related. It
doesn't alter whether brakes are applied or not (neither the hand
brake). A cursory inspection doesn't show anything visible that the
AC Blower motor failure10 Aug 2006 18:40 GMT6
I have an E39 528iT. It is an American market car with the dual zone
HVAC controls. When I start it with the A/C on (hot humid climate) the
blower will run porperly for about 2-3 minutes, and then suddenly stop
for 2-3 minutes. It will continue this cycle ad infinitum. The A/C coil
2001 BMW 323i10 Aug 2006 14:47 GMT5
Battery keeps going dead over night. Are there any well known location of the
problem.
I have ruled out Battery connections, alternator and common sense areas?
Need your help.
Z3 1998 seat moves10 Aug 2006 14:37 GMT4
The seat is not locking.  How hard is it to fix?  Moves back and
forward about 1/2 inch.
please can anybody help10 Aug 2006 14:15 GMT1
please can anybody tell me how to get into my car?  
it's a 1998 525i.
i had to put a new battery on it the old one was dead been parked up for
about 18months started first  
Rust repair10 Aug 2006 12:44 GMT1
Hi everyone, can anybody advise me on how to repair small rusts on the car
roof. Thanks.
E46 M3 rotors10 Aug 2006 12:06 GMT4
Hi All. I'm looking for recommendations regarding 2001 E46 M3 brake rotors
that are of good quality and reasonably priced. Has anyone made a recent
purchase of these for your E46 M3? There are tons of them on eBay around
$100 USD per rotor. Which is better...slots or holes? Maybe ...
Question on 1998 Z3 Idle09 Aug 2006 11:56 GMT7
I just took my 1998 Z3 1.9 over to the BMW dealer with a low idle
problem.  Idles low,  looks like about 600 rpm.  Does not cut off, but
just about does while in neutral whether hot or cold.
They said that a hose, vent valve and two up take manifolds needed to
Pages: 1 2 3 4 5 6 7 8 9 10 11 July, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.