| Thread | Last Post | Replies |
|
| key button | 04 Jun 2008 01:37 GMT | 7 |
Just bought a 1995 325ic, and the ignition key has a button on it. Neither I nor the guy who sold it to me knows what it does. Do you? TIA.
|
| 1990 535i Auto Oil Level | 03 Jun 2008 15:47 GMT | 2 |
Has anyone any idea on the correct way to measure the oil level? After a five mile drive when I check the tranny oil level there is no oil showing on the dipstick(checked while engine still running). Wait 5 minutes and it shows above full with engine off. It also shows above
|
| 2007 X3 3.0 Engine Tick | 03 Jun 2008 13:06 GMT | 2 |
I have a 2007 X3 3.0 that developed a loud ticking noise within about 2~3 months after I picked it up. It is now about 10-months old/15K miles. It is real random when it will act up. It happens almost as much when it is at operating temperature as it
|
| Z3 Dashboard Wind Whistle | 03 Jun 2008 03:24 GMT | 1 |
I get a whistle coming somewhere from in the dash (behind the instrument pod?) when I'm driving 50-60MPH with a strong cross wind coming from the left. Non of the HVAC settings make any difference. It's wind
|
| Yeehaa. Just picked her up last Tuesday | 01 Jun 2008 23:18 GMT | 1 |
It was time to upgrade the 2002 325xi to the 328xi 2008 model. After I got the wife the 328xiT last August I have been envious of her ;-) Check out the pics at my website: http://home.comcast.net/~wernergr/cars/bimmer.html
|
| Smell of melted plastic and no way to start.93/740i | 01 Jun 2008 21:19 GMT | 4 |
During the driving was smell of plastic. After stop is no way to start engine. In air condition compressor area is lot of black plastic melted parts like thick folia. Where from could by this plastic? Why engine is not starting? (Fuel pump is not running). All small fuses are OK. ...
|
| Auto to man swap- 535i e28 | 01 Jun 2008 12:47 GMT | 2 |
Can somebody advise if an 85 323 5 speed manual fits to an 86 535i, obviously excluding the need for pedal box exchange. cheers Tom
|