help?????????

I have put in a system in my 1987 Chrysler LeBaron It has Clairon 3.5's
in my dash Pioneer 5.25's 6x9' and a 12" 300W sub in the trunk. My 6x9's
are amped by a Kicker 50si and the sub is amped by a Kenwood 300W amp.
With a JVC KD-6S90 head unit w/ one preout the amps are ...

Sorry that I had to repost this again. I took a closer look at what happened
and I noticed that there is a neutral wire also going out from the switcher
PSU. this is what touched the metal body of my amp. So basically the amp was
connected to the PSU and also the ground was ...

OK... i travel to atlanta every 2-3 months.  I live in canada.  On my
last trip, i was claiming booze on the way back to canada...so i read
over the info card on claiming...and it said (i could be wrong...or
missing a big piece of the puzzle)     "you dont have to pay duty on

I may sell my Tube Driver Blue TDB475. I purchased it new directly from BK
Butler on 8/4/03. It's in pristine cosmetic condition [having been mounted in
an enclosed amp rack] and performs perfectly. I have the factory shipping box,
packing materials and owner's manual. This is the ...

Up until last night, I had a Kenwood KDC-MP8017 head unit...until some punks broke into my truck and took it.
I am now in search for a new system.  I liked the kenwood (price and quality), however, it was a little difficult to navigate through folders.
Looking for some good ...

I've just installed an Alpine 9813 that supports ipersonalise.
I can figure out the time correction stuff but not how to
configure the paramertic equalisation and cross over control.
Can anyone point me in the right direction to sort this

I just bought the Alpine 9807 HeadUnit for 279 bucks, and i was told it
had AUX inputs so that i could hook up my portable mp3 player to it,
thats why i bought it. I'm pretty sure im just an idiot but i cant find
the aux inputs to plug in my portable mp3 player, where isit ?

I installed a Clarion system, radio, cd changer amp, remote, 2 sets of speakers
in a friends (?) boat and he says I screwed it up.  Supposedly now the
batteries go dead.  Amp and radio power go directly to the batteries and is
properly fused.  I know the yellow backup power wire ...

I need to find some replacement transistors for my Orion Cobalt CO430
amp.
The amp has a row of six heatsinked transistors along each side of the
circuit board.  The part I need is labelled:

I've put a DynAudio 360 system in the front of my car powered by a pair of
Helix HXA-400 amplifiers  (I'm very happy with this part of the system) and
now need to something about the rear; the current cutouts will accomodate a
6x9 or similar sized speaker (I'd  like to stay close to ...

I know its a dinosaur by todays standards & I don't wanna hassle with
EvilBay.  I'm including the "required" PLD1 line driver too.
What do you all think?
Lurking.

I'm about to build a box for my subs. If I was planning on putting 4 tens in
one box would there be any disadvantage in building it without divders? The
way my trunk is, it would be alot easier not to. Couldn't I just quadruple
the reccomended enclosure size of sealed box and place ...

Hi all, can anyone advise me: I have a friend who has just bought a '99
Vauxhall Vectra with a standard Vauxhall Radio Cassette in it with the
display mounted remotely from the head unit. He wishes to install a CD head
unit, or multi changer. Does he need a VAUXHALL part, or is ...

Probably stupid questions... so please be kind to someone just getting
into audio but wants the best!
I'm wondering what are the advantages/disadvantages/differences
between sealed and vented sub enclosures. When would you use one vs.