I purchased a 15" RF sub (1000w RMS, 2000w peak) a couple of years ago
and it has been sitiing in my garage ever since. Now I want to upgrade
my current system and I'm not sure if I should use the 15" RF that I
already own or buy a 12" Audiobahn AW1206T (possibly two). I listen to

Just picked up one today and It gets 2 thumbs up from me.  Quality
components for under $30.
The distribution block is not a 1in - 4out type.  It is a 1 in 2 out.
But the 2 outputs can accomodate up to 4Gauge.

Looking to see if anyone has an owner's manual for the Alpine 7347 deck, the
3330 EQ and the 5950 CD Changer.  Alpine doesn't have them, and neither do
any of manual sites on the net.  Will pay if you make copies of yours and
mail them to me.

OK
This might sound awfully simplistic to y'all - but here goes.
I just bought a 94 Olds 98. Nice ride, got it cheap. There's only one
problem. It's got a basic am/fm/cassette, and it's got steering wheel

I have a small amp powering my 6x9's and a bigger one for my subs. Somtimes
my 6x9's will sound kind of distorted, they sound like a radio station not
tunned perfectly in frequency, but you can still hear the music? That is
exactly how my speakers sound and sometimes they'll cut out ...

Hey everybody, I'm new to the car audio stuff.  I don't have very much money
for a sub system at all, but I was just given 2 12" MTX subs in a box.
However, they are old, I think 4-5 years or more.  I'm now looking for an
amp, but that's not why I'm posting this.  Just to test them ...

I tried searching...
I can't decide what size of sealed box to pick. ID provides 3
specifications, Large 1.0, Normal .85 and Small .55. I pretty much excluded
the small and I'm trying to decide between the other two. I have 800w RMS

Sorry if this is a lame question - I'm very much a newbie. I picked up
this cheap dvd player at a store locally (this is in no way an
advertisement):
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3060972638&category=32825

Sigh. I need to connect my new Pioneer to my old Mazda, and they just
won't work together :) I got an Mazda <-> ISO adaptor from the local
shop, which would "fit in 96% of the new stereos". Well it seems mine
is one of the lucky 5%? The kit has two 8 pin connectors, while my

I have moved my single din radio/cd player down a slot and have put in
another single din tft screen abive where the radio was. I now have to
source a back panel to fill in the gaps or hack up my current panel
(which doesn't cater for two single DIN devices). I have made a page

Does anyone know if the Sony CDX-MP450X head unit can control a XM
radio through the "UniLink" interface?
I want to get a Satellite radio for my Daughter but do not want to
have to add a separate control box for the XM. She also does not have

I have a 6 1/2 pair of BA coaxials that i want to put into qforms
(accomodates up to 6 1/8).  is it ok to use a pair of leftcutting snips to
trim a small ring around the mounting holes of the speaker to get it into
the qform? or, will that mess up the structural integreity of the ...

I have a 2002 GMC Sonoma with a 100 amp alternator and the factory battery.
I will be adding a 1500 Watt RMS Memphis amp to my system within the next
month or so. I REALLY don't want to do any drilling or cutting. So I have a
few questions.

Whats the deal with this for the MTX 4250D:
Power 12.5 VDC
2 Ohm Load
 250 w x 1

I'm thinking of purchasing a Hifonics Zues 440A Amp to drive 4 Pionee
TS-A6880 6X8's (50W RMS, 220W Max). The amp is rated (conservatively)
55W RMS X 4 @ 4 ohms, 110W Max X 4. Will extra 5 watts RMS eventuall
kill these speakers, or am I being just paranoid. Also, does anyon