| Thread | Last Post | Replies |
|
| ext. cab S10 | 29 Feb 2004 23:05 GMT | 1 |
I have a 1994(new body style) extended cab S10, and I am not sure abou what to do for a system. The car stereo place says just a 200rms 12inc sub is enough for bass, but I am not sure. could somebody please help? Thank
|
| question on Pioneer DEH-P4600MP | 29 Feb 2004 15:55 GMT | 3 |
Hi. I am considering purchasing a Pioneer DEH-P4600MP. However, I have one question about it... and was hoping somebody out there reading this newsgroup has this stereo and can answer my question. I was in the store today checking this particular stereo out. I brought
|
| Dead Bose stereo | 29 Feb 2004 14:58 GMT | 13 |
I have a '95 maxima with bose audio system. yesterday, the sound suddenly went dead, with no warning. The system has power as the LCD is on and the casette winds and CD spins but no sound comes out.
|
| 93 Full Size BlazerInstall Question | 29 Feb 2004 12:38 GMT | 1 |
Anyone know of any installation websites or can anyone suggest how to put something other than 4x6 dash speakers in a 93 full size Blazer. The door has little to no room for mounting speakers. The kick panels seem limited also. I'd appreciate any ideas. Thanks.
|
| wirind diagram sony xplod cdx-4005 | 29 Feb 2004 05:09 GMT | 3 |
Please if any one has or can find this out for me i will be very happy indeed.I just scored this HU for $80 and installed it with ease,my only uncertainty is with the wiring itself,you see this is my problem..there is your usual 4x speaker
|
| Phoenix Gold ZX475ti Problems | 29 Feb 2004 04:08 GMT | 14 |
Hello everyone. I just bought a PG zx475ti and only half of it works! The front channels work great in stereo and bridged, but the rear channels are having 'issues'. When connected to a four ohm sub in stereo, each channel has low output and is very distorted or staticy.
|
| Help, mitsubishi wiring colours | 29 Feb 2004 03:29 GMT | 1 |
I want to install a pioneer cd radio into a Mitsubishi magna but the wire colours in the car appear to be non standard. I have removed the original factory fitted stereo (DX-262AL) and the wiring harness has the following colours:
|
| Trolling for rip-offs and beating their a.ses to the ground. | 29 Feb 2004 03:28 GMT | 6 |
As you know I got ripped off. Now for revenge. My next system will be totally remvable--head unit and amp attached to sub box with handles.
|
| My bright Dynaudios, more | 29 Feb 2004 00:09 GMT | 12 |
I've been told that the Dyns are very power hungry, and I've had a though - I'm powering them with a Zapco Reference Series 350, which should be making about 100 watts per side. Is it possible that the problems I'm having are the result of not having enough power on tap?
|
| Pioneer HU | 29 Feb 2004 00:09 GMT | 3 |
I have received a Pioneer DEH-P3500 as a gift. MOSFET 50Wx4. Anyone here have the same? I'm going to install next week end. Also, I have a set of Kenwood KFC-1684 6.5" speakers. Any experience with them? Thanks.
|
| Subwoofer displacement | 28 Feb 2004 21:46 GMT | 4 |
I did not like the sound of my Kicker CompVR 12 in a 1.75 cu. ft ported (or vented) box. I moved it in a sealed 1 cu. ft and it now sounds awesome. The subwoofer displacement is more important in the new box. I mean that the sub moves more back and forth in the sealed
|
| Pioneer car stereo manuals | 28 Feb 2004 19:19 GMT | 1 |
I've searched all over the web and newsgroups with no luck. I'm trying to find a manual for my old Pioneer car stereo (KEH-5080) ONLINE. Does anyone know where to find it? Hallrar
|
| cheap rcas | 28 Feb 2004 18:47 GMT | 21 |
I have some noise in my system. Alternator whine. I have followed the FAQ, checked grounds, used shorting plugs and have come to a definite conclusion (after messing with it for 3 hours) that my RCAs are causing the problem.
|
| Still Brax | 28 Feb 2004 18:16 GMT | 4 |
Selling Brax X2000 black and X2400 Graphic Edition. Brand New!! Never Used!! - X2000 = $700 - X2400 Graphic Edition = $1100 Photos Avaible.
|
| Cellphone mute question | 28 Feb 2004 05:21 GMT | 4 |
What is a head unit typically looking for on the ATT input, in terms of signal, in order to switch states for attenuation? Thanks, Jerry
|