| Thread | Last Post | Replies |
|
| Alpine CDA-9811 - Am I nuts? | 07 Apr 2004 04:10 GMT | 3 |
I sent my Alpine CDA-9811 to United Radio in East Syracuse, NY for repair. The symptoms are as follows: When balance is set to full-right (i.e. R15), there is NO subwoofer output. When set to full-left (i.e. L15) there IS subwoofer output.
|
| American Legacy LA190 Amp Quesiton | 07 Apr 2004 03:10 GMT | 2 |
Bought a American Legacy Amp 2d hand. I can figure out everything but the power hookup. Connectors for 12v, REM????, and GND. 12v and Gnd obvious enough, but REM? Remote on/off?? Goes to ground or hot???
|
| WTB.....Eclipse Amp | 07 Apr 2004 02:55 GMT | 4 |
Looking for a new or like new Eclipse 4 channel amp that does min. 50 x 4 @ 4 ohms. Let me know model, price and pics if possible. Thanks. dconder@cox.net
|
| [MOST WANTED] SONY CDX4000R manual | 06 Apr 2004 21:42 GMT | 2 |
I need a Sony CDX 4000R manual. If anyone can send mi it by mail it would be great. Bye,
|
| FS: Sony CDX-MP70 | 06 Apr 2004 09:55 GMT | 2 |
I am considering selling my Sony CD Player CDX MP70. It is XM Ready and plays MP3. Really nice! It has about 10-weeks use and is just fine without any problems. I acquired it as a temporary player until now.
|
| opinions or 6.5" coaxials | 06 Apr 2004 01:54 GMT | 4 |
just wanted get some opinions on a few 6.5" coaxials im looking at. Right now im looking at the Crystal Csx615, Alpine SPR 6.5, diamond audio m3 6.5.. the only ones i dont have access to listening to are the crystals.
|
| Philips DC012 CD Changer - Compatibility? | 05 Apr 2004 13:33 GMT | 1 |
Does anyone know which head units are compatible with a Philips DC012 6 disc cd changer? and the type of bus cable to connect them? Also which cars these are installed in? I think Peugeout 406 and Vaux Omegas had them - but im not sure....
|
| What would be a good amp? | 05 Apr 2004 10:54 GMT | 2 |
I'm getting one 15" Kicker Solobaric L7 and want to know what would be a good amp to power it. I want a nice powered amp that will make the sub pound, I have a budget of about $300. Any suggestions would be appreciated.
|
| 1992 jetta install..... i just dont get it.... | 05 Apr 2004 08:39 GMT | 2 |
I am gonna install a stero system in my friends 1992 jetta. Normally i do quite well on installing car audio in cars (except for new ones, i fear breaking a piece of interior that will cost me 300 bucks to replace). ANYWAYS.... his car is the wolfsburg edition, and it has a
|
| Zapco etc D/A converter help! | 05 Apr 2004 04:06 GMT | 1 |
Hey folks I am interested in using an aftermarket (Zapco, PPI, etc) D/A converter in my system. The headunit is a STOCK 2000 Saab (Clarion?) unit. I know the Zapco DAIISL has "analog inputs", but arent the analog outputs
|
| Was I LIED to with this ALARM? | 05 Apr 2004 02:52 GMT | 2 |
I recently purchased an AlphaGuard AG-95G from an eBay seller located in Hong Kong. I got the alarm really quickly and was happy with the communication and service this seller offered. But one of the main reasons I bought the alarm was because he states the alarm is an "FM"
|
| mp3 player to car stereo????? | 05 Apr 2004 01:23 GMT | 5 |
What's out there with an audio input to run from an mp3 player? I've tried the radio transmitters and am not impressed - I thought there might be something with a S/PDIF or 1/8" stereo in? What I want to avoid is all the surplus media, having cd's floating around everywhere
|
| Poor AM reception due to After Market Changer | 04 Apr 2004 21:39 GMT | 1 |
All, Your help would be greatly appreciated. I recently purchased a used car that has an after market 6 cd changer added on. I realized shortly after buying the car that the AM signal was horrible. A car stereo dealer told me that
|
| jensen auduo, setting the clock | 04 Apr 2004 18:49 GMT | 2 |
how do I set the clock on my jensen cd player
|
| a/d/s 850MX Pin Configs | 04 Apr 2004 17:26 GMT | 4 |
Well car audio is like crack, you just gotta have more. In my attic I have an a/d/s 850MX form a previous install 5 years ago. Does anyone have or know where I can download a manual for this amp so I can re-pin the jumpers to work with my system? I have 1, soon to
|