| Thread | Last Post | Replies |
|
| Is it OK to bang on houses with rubber mallets? | 22 Jul 2004 18:41 GMT | 46 |
I'd like to know the difference between running up to someone's home and pounding on it with a big rubber mallet (muted, heavy vibrations) vs. driving down a street sending out bass shock-waves that affect many homes at once.
|
| Ancient amplifier free to good home (new in box, you pay to ship) | 22 Jul 2004 18:38 GMT | 11 |
10+ years old probably, new in box though, never installed. Sony XM 2022 2 channel, 20wRMS 35wMAX 2ohm capable About the size of a shitty paperback romance novel, 1" thick
|
| CD Changer Reset, common problem? | 22 Jul 2004 16:15 GMT | 1 |
First of all, I like to ask if disk jammed and reset problem common to most CD changers. I have a Sony CD receiver CR-C610, probably 5 to 6 years old already, but the sound is very good. I used to have a 10 disc Sony CD changer, which got
|
| How a Car Radio Play MP3 Songs in a CD? | 22 Jul 2004 15:32 GMT | 2 |
I see many new car radios can play MP3 recorded in a CD. Considering the fact that a CD can contain as many as 200 MP3 songs in it and the screen on a car radio is very tiny, I am wondering how we can select a MP3 song or a serie of MP3 songs from a CD.
|
| HCCA 4 Channel Amp Help Needed | 22 Jul 2004 08:20 GMT | 2 |
hi all. i just got an older 4 channel HCCA amp. it is red, about 2.5 feet long and it had a plexiglass cover on top that is now missing. there is an opening on top with a lot of jumpers on two boards that i imagine are the crossover settings. can anyone provide a manual or
|
| Fiberglass | 22 Jul 2004 07:28 GMT | 3 |
Someone gave me a really good web site with some really good pics of basic fiberglass work but my PC crashed and I lost the address. Does anyone happen to have the one with good pics and steps for fibergalss work?
|
| Wiring 2 ohm DVC sub, 2 channel or Bridged | 22 Jul 2004 05:08 GMT | 19 |
I'm installing a Elemental Designs 2 ohm, DVC sub and have a question about the best way to wire it. My Profile Clarus amp can deliver 110 Watts RMS into two channels at 2 Ohms or I can bridge it to deliver 225 Watts RMS mono at 4 ohm (the amp isn't 2
|
| Using an external mp3 player in the car (?) | 22 Jul 2004 03:52 GMT | 1 |
So I went out and just messed around in the car for a while..I put an AUX/RCA cable in the Line-Out of my iRiver mp3 player and then put it into the Input of my car amp..The bass came out awesome through my subs and everything..The only problem..My mid/high range speakers are
|
| 500W RMS Stereo amp stable@1ohm?? | 21 Jul 2004 18:29 GMT | 11 |
Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards
|
| 3 10s Vs. 2 12s | 21 Jul 2004 18:25 GMT | 4 |
I know this has done to death but what's better from a SQ standpoint?
|
| Too *much* power? | 21 Jul 2004 18:20 GMT | 6 |
No such thing, right? ;-) Just trying to get a little advice. I'm putting the following into a 2003 Nissan 350Z:
|
| KEF 160Q any good? | 21 Jul 2004 15:26 GMT | 1 |
I have had some of these for a couple of years and just fitted them in some custom door pods. They sound quite pleasant, but dont seem to produce any bass despite moving quite alot. Are they a good speaker? What's the power handling?
|
| XM solution for a 2004 Prius? | 20 Jul 2004 23:49 GMT | 4 |
Any ideas, other than a Roady or SkyFi system? -- Samuel Fang LEAVEsfangOUT@vt.edu
|
| Thoughts about XM radio | 20 Jul 2004 23:42 GMT | 4 |
I love car stereo equipment. I own everything possible a car stereo can have. The only thing that I do not have is XM radio. I am thinking of purchasing XM radio, but I would like to get some adivse and thoughts about it. Currently I have
|
| Is this a good system? | 20 Jul 2004 20:47 GMT | 1 |
Ok, I'm finalizing the setup since I have found out that Alpine is going to have BOTH an iPod interface AND Sirius (direct from Alpine's mouth). HU - Alpine CDA-9833 (Does anyone know if this support two line
|