Hello, (x-posted to a few groups)
I can't listen to music on my car stereo anymore unless i turn it up to
the max, it is very soft still. I was wondering, has the internal amp
fried itself? A similar thing happened to another car amp in a previous

I have a 1997 Olds Bravada. The left rear speaker is not working. I am
planning to start at the speaker and work my way forward. Does anyone know
of any on-line examples of how to remove the door panel? I was trying to
find a chilton's repair manual as well, but could not find a ...

I've got a Chrysler AM/FM/CD player that I pulled out of a 1996 Dodge
Stratus and can't seem to get anything intelligent out of it.  I hook it up
and it just beeps repeatedly back at me when I try and tune in a radio
station.

Hi guys/gals,
I'm having a bit of a problem. In order to set my amp gains properly,
I'm supposed to set my HU volume at around 75-80%. Well I have a
factory Nissan Altima HU that has no indicators whatsoever of volume

I just got new woofers and I think they are clipping or my amp is broken.
The amp is Sony XM2200GTX 2-Channel Car Amplifier I used to have two woofers that were very cheap 4ohm woofers but the amp was too strong for them but the speakers stopped working because they just slowly ...

I just got an alarm installed with a 2 stage microwave sensor in it. I
know its a 2 stage sensor because I took off the dash and looked.
When you walk next to the jeep the full alarm goes off. The guy that
installed it said that is the ways it works no warning chirp.  The

I have just purchased a Pioneer DEH-P5600MP MP3 car stereo and put it in my
Saxo.  However, unlike the standard factory fitted CD player that was
previously in the car, the Pioneer doesn't turn on without the ignition
being on.  I just wondered why this was and if it could be ...

I have recently bought a 7998 and am having problems in getting MP3
CD's to work. I have ripped my cds at 256Kb/s VBR using the LAME
encoder, then using Nero (with many different settings) to burn the
cd.

Just picked up a set of used non-paper speakers, and one of the dust caps
has fallen off. What's the best way to reattach it? Rubber cement? Silicone?
MIG welder? (j/k) I seem to recall using generic rubber cement "back in the
day," but it's been a few years and maybe there's a ...

ive just baught me a Ti12 (SVC) but im a bit baffled at why there are
two sets of speaker terminals (2 +) and (2 -)
if theres anyone out there that can help then please do!!! :)

I have a '89 Dodge Ram (pickup truck) with stock stereo. Right now it
only has radio and tape (and the tape doesn't work). I would like to
put in a CD receiver.
Which of these would you choose?

Hi, I have an older Polk DB12-4 speaker (from about 1999 or 2000, back
when Polk was putting out pretty quality stuff.) This sub was rated for
400 watts RMS/800 watts peak. I am having trouble finding the specs
anywhere for how much cubic space a sealed box should have for it.

I just purchased a Delphi Rhodey, and am very dissapointed with the
wireless FM modulator. It just doesn't seem to work very well, the
quality is slightyl better then FM, and not at all close to CD.
Although I've tried all the station settings, in my metro area every

Anyone know where I can get my hands on an Alpine KCA-420i (iPod Interface)
?

hello, i have an older sony cdx 1300 in my car that has narrowly
averted being torn from the dash and thrown out the window more than a
few times.  the problem is this: it refuses to play certain COMMERCIAL
cds.  it'll make a terrible whirring noise, like it's spinning the