I'm a beginner installer and am having a problem getting started with
replacing the rear speakers of my '90 Corolla.  Can't figure out what
to do first: remove rear deck "carpet" (or how to do it), or remove
speaker coverings (how?) or what.  Sorry to seem so dumb, I'm really

I blew the one of the mid-range drivers in my Infinity Reference 610cs
component set.  As these speakers are about 8 years old I assume I can
no longer obtain a matching driver.  Is there any reason I can't
replace the mid-range drivers with a new set that has similar specs?

Hey all,
Im planning on making a new system up for my car that is being completely
redone interior and exterior at the moment and have this system in mind.
Kenwood KVT915DVD Head unit

Hey everyone, I currently run a Clarion 545 head unit with a RF Punch
401s amp running JL xr components in the front.  I have another RF
Punch 401s running 2 10" JL's in a sealed enclosure.  Everything
sounds mint.  However, upon a recent talk with a sales guy he says my

are these amps stable to 1.33 ohms? one store says they are, the other says
no.
any feedback?

I just noticed that the speaker-level input connectors that came with my
MTX404 amp have 18AWG wires attached to them.  However the amp kit I
bought contains 16 gauge speaker wire.  Would connecting two different
wires together be a bad idea?  Should I go out and grab some 18 gauge

I have a MTX T81044a which is a 10' dual 4 ohm sub. Anyways I've had it for
a couple of months now. I recently removed it, to change boxes, and noticed
that one of the tinsel leads has come unsoldered from the binding post.
Apparently my buddy who 'does these all the time' hooked it ...

I just bought a 01 Mustang with the Mach 460 Sound System with the 6 Disc in
dash changer, was wondering what you guys think about the system. And also
im going to be adding a Rockfort Fosgate amp, the guy im taking it to knows
how to do it, and 2 10" subs, have you all heard of any ...

Anyone able to help me with wiring identification for Pioneer CDX-M2116zg, 12cd
changer?  Manufactured March 2000.  Apparently not an aftermarket, but a OEM
unit, suspect GM harness, perhaps Chevrolet? Harness wires clipped 12" from
unit.   Pioneer  Model CDX-M2116zg.

I'm looking for a good and inexpensive cd-player to replace the stock
radio in my '97 Camaro. I've found the Pioneer DEH-P3630MP, which seems
like a nice player. However, I haven't found any reviews anywhere, so I
was wondering if anyone here has tried it? I'm especially ...

I take all my CD's and compile them on my HDD, but this cd player won't play
them.  If its a burned copy of a normal retail CD it works, but it won't
with mixs. Don't know why.  Would there be a changer option that I could use
that would recognize them?

I've got an AM/FM/CD player that I pulled out of a 1996 Dodge Stratus (I
think this is basically the same as a Chrysler Sirrus) that I am trying to
install into my 1987 GMC S15 quarter ton truck.  I'm a little confused on
the pinouts (quite different between the two) and thought ...

anyone know of any sub enclosure software that will draw the box out with
the measurements etc...
besides BLAUBOX that goes to the start screen every 2 seconds.
thanks in advance

A Delco AM/FM CD player forsale out of a 2001 Chevy Cavalier.
Works fine.  $40.00 plus your choice of shipping.
Ed Strauss
es8m@virginia.edu

I was looking at somthing like this...
http://iweb.alpine-usa.com/pls/admn/subcategory_info?p_category=20&p_subcategory
=45&p_main=10
Buck
"Buckshot" <Jasonc87@comcast.BLAHnet> wrote in message