| Thread | Last Post | Replies |
|
| MA audio.... why so cheap? | 27 Sep 2004 00:28 GMT | 3 |
I thought MA audio was a good brand. The local luqidation electronic store that normal carries thump/pyrmiad etc etc is now carrying MA audio speakers,amps,subs... Is MA audio anygood?
|
| Has anyone put new speakers in a Toyota Highlander? | 26 Sep 2004 21:13 GMT | 4 |
Yep, got a 2004 Highlander. Lots of boom, no articulation. I'd like to replace the speakers in the front doors with some coaxials. Crutchfield says the speakers are 6.75 inches. I don't plan on replacing the stock CD/Radio, so I need speakers that
|
| Bridging an Amp | 26 Sep 2004 19:24 GMT | 4 |
I have an old Orion that puts out about 60 watts @ 4 ohms per channel in 2 channel operation but jumps to 260 watts in bridge (mono) mode. I was wondering if the output in bridge mode is as clean as say two channel mode? Is there a lot more distortion present in bridge mode?
|
| Pioneer KEH-1300 | 26 Sep 2004 02:46 GMT | 1 |
I have been give a Pioneer radio cassette to install in my car. The unit does not have an on/off button. I have wired it in an can only get the button lights to work. How do I switch the radio on? Many thanks.................
|
| German or Japanese Car Audio? | 26 Sep 2004 01:50 GMT | 16 |
I am interested in which you think is better: Car audio equipment developed by Japanese companies, or equipment developed by German companies? To be honest, both have their strong points, but I would have to say the German engineered equipment is far more solid,
|
| ADS 235is - anyone have any experience with these? | 26 Sep 2004 01:39 GMT | 5 |
These are 5.25" component speakers from ADS. Several online retailers have them aggressively priced as part of a closeout or clearance. Can anyone comment on the character of the sound produced by these units? Thanks
|
| Precison Power A600/A404 manual? | 26 Sep 2004 01:37 GMT | 3 |
Need a manual for either or both Precision Power A600 or A404. I believe the info i need will be contained in either manual. Any online resources for these manuals? aarichardson AT gmail DOT com
|
| How To Bridge Xtant A4004 Stereo No Mono?? | 25 Sep 2004 23:15 GMT | 1 |
Could someone please tell me how to bridge a XTANT A4004 4 CH AMP i Stereo mode NO MONO? The manual ONLY makes reference to bridge the 4 c into 2 ch MONO (left + and right - from the upper speaker block, an the same for the lower block, for a 2 CH MONO BRIDGE).
|
| CHEAP AVIC N-1 INFORMATION INSIDE NAVI/DVD/MP3 TOUCH SCREEN | 25 Sep 2004 16:24 GMT | 4 |
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=79834&item=5722441761&rd=1 This auction has great information to obtain a unit for $85.00.
|
| blowing speakers w/ mp3s | 25 Sep 2004 03:52 GMT | 5 |
I just bought the Pioneer 8600 with the Orion C-series Sound great...but now i'm listening to my mp3s w/ the equalizer... i hear a bit of distortion w/ some of the files i recorded. i think i better lower the decibal level right? and rerecord them so that they
|
| Cellphone feedback through sub | 24 Sep 2004 23:36 GMT | 20 |
I have had two conflicting opinions on this issue. My cellphone causes feedback through my subwoofer. The phone is a hand held phone (not installed in the vehicle). My car audio dealership has never heard of this happening before. They
|
| MP3 player, amp and a motorcycle | 24 Sep 2004 23:02 GMT | 1 |
All, would it be possible to take the output of an small portable MP3 player into an Amp to the speakers? Is the line level of the MP3 player too low or high for the amp? Is it even fesible? It would be nice to be able to take my MP3 player with me. headphones are not an
|
| RCA Cable Question | 24 Sep 2004 17:54 GMT | 2 |
I have RCA cables for my home audio system, but they are ones I took from my car stereo. So for the audio L/R going from my tv to the receiver, the cables are actually red and blue, used on one of my amps. I notice that there is a little thin wire between the 2 regular
|
| take off Toyota Sienna door panels -- how??? | 24 Sep 2004 17:00 GMT | 4 |
I would like to take off the door panels so I can dynamat and also install the new components that I just got. 1. How would I take off the Toyota Sienna door panels 2. Should I run new wires for the amp or just use the factory wires?
|
| battery isloator | 24 Sep 2004 12:58 GMT | 1 |
I'm putting a 2nd battery in my trunk. I have a 225 amp alternator, and a 250 amp isolator. Why couldn't I attach both the alternator feed and the 1/0 going to the trunk to the middle terminal of the isolator, and my starting battery to either of the 'isolated' terminals? I'd ...
|