I was feeling my way around the back of the CD-deck in my car (ie,
wasn't keen to pull it out until ready) in order to answer the following
questions for myself :
1) Does it have an Aux in.

I have a 10 farad cap w/ built in distro block on it in my setup. My sub amp
is being replaced right now so I just have taped up power leads hanging
there. When my new amp arrives how do I hook it back up without blowing
something up? I think before I had the cap i would just ...

I thought I would post a review of my new system.  I recently installed a
new Kenwood Excelon KDC-X679 HU,  a KAC-X541 4 channel amp, Sirius tuner,
Orion amp, Polk Momo 6 x 9 speakers in front, older Polks 6 x 9's in the
back and a home made sub-10" Titanic driver.

I'm looking for a headunit that is able to play mp3s without providing
moments of silence between each mp3 to load the next one.  I don't see why
manufacturers can't figure out how to do this.
Does anyone know of any that have this capability or one of the 05 models

Ok, so I am slowly making progress on my install.  Got the 4ga wire ran from
amp in trunk to battery, fuse holder, battery terminal and ground lugs all
installed today.  I need to run the RCA interconnects from HU to trunk, and
am planning on running the Riot-Gamma wires from amp ...

I'm trying to get a bridge sound from a new 600W amp.
Gee...it's totally sh.t. Bridget sound is really a broken
sound created by the low filter amp. Why anyone wants to enjoy
this? I know bass is good but too much bass is a trash.

Call me cruel but this is the funniest thing ive seen all year. This kid has
a mental break down on his webcam. I dont know what this has to do with
anything...but it makes me feel a lot better about myself.

I have a JL 250 mono amp with a JL 10w3.  I want to upgrade to a 10w6,
but use the same amp.  Will there be an improvement in sound without
getting a bigger amp?

My friends deck doesnt have a lead on switch to go to an amplifier.
But since he wants to add an amp, im kinda wondering how i would go
about putting a switch between the battery and the amp itself, but i
dont want to put too much power into the amp through the switch..  so

My local shop (House of Car Stereo Lansing MI) sold me a new set of 5.25s
for the front about 3 months ago. Just for the hell of it I tested my old
speakers at school. They both meter fine. What would you do? I guess I do
have the new model blaopunkts.....still.....

Hi...I have a 1994 Ford Explorer Limited...with the factory premium sound
system/sub...
When the cd player crapped out I had a sony stereo w/10disc changer
installed using the existing factory amps...

Just replaced the stereo in my  car (Subaru Liberty GX 1994) with a pioneer
DEH-P4650MP (mp3/wma/cd/tuner) whilst everything works fine. I find that the
AM radio is very crackly and noisy when the engine is turned on. If the
ignition is in the Accessories position AM radio is ...

Does anybody here have experience with either Stinger Expert series or MTX
Expert series interconnects?  Where did you find your best price?  How is
the performance from a soind quality and RFI/EMI noise perspective?  Or,
have you made your own interconnects with silver plated ...

It's a pain having to drive to countless stores and scouring everywher
to see what all is out there.  There has to be some sort of definitiv
source for car audio decks, speakers, amps, etc...  I'm trying to fin
a comprehensive list of car audio deck manufacturers, along with all o

Okay, I understand the very basics of speaker operation: the amplifier sends
an AC current at, say, 100hz; this causes the speaker cone to move back and
forth at the same frequency, which creates the "waves" of varying air
pressure that make up sound.