The JVC KD-SH99
(http://www.crutchfield.com/S-t05YuADVkaz/cgi-bin/prodview.asp?I=257KDSH99&search
=KDSH99)
features RCA input jacks on the rear and an auxiliary input jack (1/8")
on the front as well. This is perfect for my setup, as I want to keep

My current setup in a Jeep Wrangler:
Pioneer DEH-740 MP Head Unit
Cadence Z4000 4 ch Amp (75 x 4)
Pioneer TS-C130 5 1/4" components up front

I posted the pictures yesterday on how to fix the Ford radio. Today I
get a email from a "lawyer" saying that he has a client the did the
repair and it burned up his car and apartment.
Right off I'm thinking that it is a hoax so I go to check the owner of

alrite, so this morning im driving to school, and my battery gage is wa
down, as in...cant really get any lower. i didnt even have the syste
on, cuz my sister says it gives her a headache(ya i got roped int
driving her every day). so when i got to school, me and some of m

I am thinking of building a box in my spare tire well. I don't have
much depth, so I need all that I have.I have 2 Punch 10" woofers. I
was thinking of building the bottom of the box from fiberglass. That
would give me plenty of depth for the speakers, maybe even enought to

I'm currently in the process of upgrading my car stereo system.
I just bought an Audiobahn A8002T amp based on numerous recommendations,
shown at link below.  
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=

Hejka potrzebuje bardzo pilnie schematu albo instrukcji do tego
wzmacniacza...Nie moge tego znalezc, szukalem na stronie
http://pioneerelectronics.com/ ale nie ma tam tego modelu(chyba za
stary:)) Jestem bardzo wdzieczny za kazda pomoc!

I have a 20gig iPod and a Panasonic CQ-DFX683 receiver with "C
changer" control.  It also has CD changer RCA inputs in the back, alon
with a changer control connector labeled as "DIN" in the manual.
I've attempted hooking up the iPod to the CD Changer RCA inputs, bu

Just purchased a 2004 Astra SXI (last of the old shape) with steering wheel
audio controls.
In my current car I have a Pioneer KEH-P6500R head and a CDX P1250 boot
changer.

Hi gang,
Haven't been around the car-audio scene for a while.
I'm almost about ready to plunk down another few grand for changes to
my audio setup....

My radio recently "lost" the preset memories. I retuned & it has kept them
since.
However, I cannot get MW frequencies anymore, the RDS & TA do not work, the
FM tuner goes up in .10 steps instead of .05 (this doesn't really matter) &

I'm currently building a ported sub box for my van. The manufacturer
specs call for a single 3.4" long 2" diameter port. But, I want to
avoid port noise, even though I already bought the 2" ports. Can I
simply put dual 2" ports that are 1.7" long in the box, keep the same

I'd like to know what is a Tri-Axial speaker?
I have seen this term used for 3-Way Speakers? Is that the same?
My concern is about the similarity with the term CoAxial that refers to
the connection type.

I am looking into a new CD reciever/in-dash player, for my 1984 BMW 528
four door sedan.  I've come down to the elimination of all the model
to two different brandes.  Pioneer and Sony.  Over the years in m
residence we have obtained many of Sony's products as far as surroun

I'm thinking of installing possibly one 8" sub in my spare tire well
using 14" pvc and want to see if I have enough air volume. What's the
formula for doing this?
Thanks,